Selecting The 5.1-Channel Signal Playback Method <Extended Surround; Adjusting Volume Between Input Sources <Volume Trim - Yamaha HTR-5063 Owner's Manual

Owners manual
Hide thumbs Also See for HTR-5063:
Table of Contents

Advertisement

Adjusting volume between input sources
Volume Trim
Input source:
All
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
Adjustable range
-6.0 dB to 0.0 dB to +6.0 dB
Default setting
0.0 dB
Adjustment
0.5 dB steps
increments
Setting the format of digital audio signals
Decoder Mode
J1
Input source:
HDMI1-4, AV1-4
Sets the format of digital audio to playback to DTS. For example, if
the format is not automatically detected correctly even during
playback of DTS format audio, this menu item can be used to set
the playback format to DTS.
Auto (Default)
The audio format is automatically selected to match
the format of the input audio.
DTS
Selects DTS signals only. Other input signals are not
reproduced.
J J
1 :
AV5-6 or AUDIO1-2 are also available when the "Audio Return Channel"
function is on, and the source is used for the TV audio input (TV Audio In).
Selecting the 5.1-channel signal playback
method
Extended Surround
J1
Input source:
HDMI1-4, AV1-4
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1-channel when surround back speakers are used.
Auto (Default)
Automatically selects the most suitable decoder if a
flag for reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-channel.
q PLIIx Movie
Always reproduces signals in 7.1-channel using the
Dolby Pro Logic IIx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
q PLIIx Music
Always reproduces signals in 6.1- or 7.1-channel
using the Dolby Pro Logic IIx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
EX/ES
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6.1-channel.
Off
Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
Configuring the settings specific for each input source (Option menu)
SETUP
46
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr5063blRx-v567

Table of Contents