Beko BKK 2126 P Manual page 9

contact the technical service.
Temperature setting
The following table must be obser-
Fabric Type
Synthetic
Silk
Woollen
Cotton
Linen – Jean
Auto-off
The iron has been equipped with
automatic circuit breaker against the
risk of being forgotten when plugged
in.
8 minutes
When you plug in the iron and leave
it in vertical position, it will reach the
set temperature in 2-3 minutes. If it
is not moved for about 8 minutes,
the electric current will be discon-
nected and the iron shall cool down
as if it has been forgotten plugged.
(Figure 8)
ved when doing temperature setting
and steam ironing.
Temperature Setting
•
•
••
•••
Max
2 minutes
When you plug in the iron and leave
it in horizontal, ironing position for
2 minutes, the electric current will
be disconnected and the iron shall
cool down as if it has been forgotten
plugged.
30 seconds
If, after the initial warming, your iron
is not moved for about 30 seconds
in horizontal, ironing position, electric
current will be disconnected. (Figure
9)
8
In all three cases, when the electric
current is disconnected, Auto-off
light will flash. In that case, if the
7
Steam Setting
Dry iron
Dry iron
Steam iron
recommended
Steam iron
Steam iron
9