Beko BKK 2126 P Manual page 7

and slightly lean the horizontal iron
forward to fill the water tank with
the softened water whose lime has
been filtered as shown in Figure 2.
(Figure 3)
Make sure that when the iron is in
upright position the water does not
go above the maximum line on the
transparent water tank.
MAX
Even when ironing without steam,
fill the iron with water in order to use
the water spray when necessary.
When using the iron for the first time,
fill the water tank twice with tap wa-
ter and vaporize it. This is important
for cleaning the water channels and
for steam performance. Press shock
button and shake the iron from time
to time during vaporisation. Always
use softened water in the following
ironing operations.
Temperature setting
After inserting the plug in an earthed
socket, set the temperature setting
using the setting button according
to the type of clothes and place the
iron in upright position. When steam
ironing, temperature setting must be
at •• or above.
Network warning light will be on as
long as the iron remains plugged in.
When temperature setting is done;
thermostat light will be on until the
base reaches the set temperatu-
re and will remain on during the
periods in which the heating element
operates during ironing. You may
start ironing after the thermostat light
3
goes off.
Steam Ironing
When the thermostat light goes off
while the steam setting button is
in
sufficient to generate steam. You
can have continuous steam at this
position. (Figure 4)
Dry ironing
You can do dry ironing when the ste-
am setting button is in
Make sure you fill water in the tank in
order to use the spray button when
5
position, temperature is
Auto
Max
Min
position.
4