Download Print this page

Control Panel - Electrolux IK2720BL User Manual

Hide thumbs Also See for IK2720BL:

Advertisement

Available languages

Available languages

• This appliance contains hydrocarbons in
the cooling unit. Only a qualified person
must do the maintenance and the
recharging of the unit.
• Regularly examine the drain of the
appliance and if necessary, clean it. If the
drain is blocked, defrosted water collects
in the bottom of the appliance.
2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use only
original spare parts.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• The following spare parts are available for
at least 7 years after the model has been
discontinued: thermostats, temperature
sensors, printed circuit boards, light
sources, door handles, door hinges, trays
and baskets. Door gaskets are available
for at least 10 years after the model has
been discontinued. The duration may be
longer in your country. For further
information, please visit our website.

3. CONTROL PANEL

1
2
7
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. FastFreeze indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. FastFreeze button
Temperature regulator
3.1 Switching on/off
Switching on
3 4 5
6
• Please note that some of these spare
parts are only available to professional
repairers, and that not all spare parts are
relevant for all models.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and
pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation
materials of this appliance are ozone-
friendly.
• The insulation foam contains flammable
gas. Contact your municipal authority for
information on how to discard the
appliance correctly.
• Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
1. Insert the plug into the wall socket.
2. Press the ON/OFF button if all LED
indicators are off.
Switching off
Keep touching the ON/OFF button for 3 sec.
All indicators light off.
3.2 Temperature regulation
Before regulating the temperature, select the
compartment.
To select the freezer compartment press the
compartment selection button until LED
corresponding to the lower cavity lights up.
The temperature LED indicator shows the
latest set temperature. Recommended setting
is -18°C.
To select the fridge compartment press the
compartment selection button until LED
corresponding to the upper cavity lights up.
ENGLISH
53

Advertisement

loading