ROOMS TO GO Kids Teens 1497Y Assembly Instruction Manual

Size of mattress and Foundation
Full size bed is designed to use a mattress (74"-75"long*52 1/2"-53 1/2"wide) for upper Bunk and (75 1/2"-76"long*52 1/2"-53 1/2"wide) for lower Bunk.
Ensure thickness of mattress and foundation combined on upper Bunk does not exceed 10".
The total thickness on Lower Bunk must be between 9 1/4" to 11".
Note:There must be at least 5" from mattress sleeping surface to top edge of guardrail.
Replacement Parts
Replacement parts,including additional guardrails,can be obtained from any of Room To Go Furniture dealers.
Safety Warnings
1.Follow the information on the warnings appearing on the upper bunk end on the carton.Do not remove warning label from bed.
2.Always use recommended size of mattress or mattress support or both to help prevent the likelihood of entrapment or falls.
3.Surface of mattress must be at least 5 inch below the upper edge of guardrails.
4.Do not allow children under 6 years of age to use in the upper bunk.
5.Prohibit more than one person on upper bunk.
6.Periodically check and ensure that the guard rail, ladder and other components are in their proper position, free from damage and that all connectors
are tight.
7.Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.Always use the ladder for entering and leaving the upper bunk.
9.Do not use substitute parts.Contact manufacturer or dealer for replacement parts.
10.Use of a night light may provide added safety precaution for a child using the upper bunk.
11.Always use guardrails on both long sides of the upper bunk.
12.The use of water or sleep flotation mattress is prohibited.
13.Keep these instructions for future reference.
14.Strangulation hazard - Never attach or hang items to any part of bunk bed that are not designed for use with the bed; for example ,but not limited to
hooks, belts and jump ropes.
MODEL# 1497Y/1597Y FULL STEP BUNK BED
ASSEMBLY INSTRUCTION
Page 1/11
MADE IN VIETNAM