w,~~.&~&
~*-**f&j#
. ...,.
,.,.~&ze*J,%,tiwew*T.4
*%%!J
.. . . . .
,“-
,“..
-
.
:,,
-,$r*&?,,.,
e-.
~ #.,-i*-a?*,l`,.~.%3*ws#. - &-tib-J-K# i.*.
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO
LOGIC system, it is important to position the speakers properly.
Refer to the following illustration to find out the best location in
your room
I
@
I
@(
@ Front speakers
@ Center speaker
Position in the center of the two front speakers.
In addition,
position on or below the TV set, if connecting a TV set to the
unit.
@ Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
@ Subwoofer
Place the subwoofer on the floor close to a wall or in a corner
of the room.
m
No sound is heard from the center and surround speakers when
the DOLBY PRO LOGIC is set to off.
The center speaker sounds when the DOLBY PRO LOGIC is
set to on.
Before connecting
the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no differences
between the front speakers. Both
speakers can be connected as L (left) or R (right).