Panasonic WV-7260D Operating Instructions Manual page 7

WV-7150D or WV-7160D + WV-7260D:
WV-7260D
$9 6%)
Yr EXT
ViDEO [OIA sync
The wire gauge can be determined by the chart below.
WV-7150D -+ WV-7260D:
WV-7150D
AWG size
UL 1007
UL 1015
AWG size
UL 1007
UL 1015
Coax. Cable
V (VIDEO)
S (EXT SYNC)
е Cable assembly:
е How to assemble the connector
Strip back the cable jacket approx. 0.1 inch (3 mm) and
separate the individual conductors.
Approx.
0.1 inch
"-.---"
Wire
Up
| 4 Insert
LN
Contact
Insert the wire until А position
and clamp the contacts.
Prepare the individual conductors for clamping. ії
clamping, use MOLEX brand tool part number
57027-5000 (ог UL-Style cable UL1015) ог
57026-5000 (for UL-Style cable UL1007).
After clamping the contacts, push them into the proper
holes in the connector housing until they snap in place.
Up
t Wire
Contact
CAUTIONS:
e Shrinking the cable-entry seal is a one-time procedure.
DO NOT shrink the cable-entry seal until it has been
ascertained that the unit is functioning.
е CONNECT THIS TO A 24V AC CLASS 2 POWER
SUPPLY ONLY.
Cautlon:
To prevent fire or shock hazard,
the UL listed wire VW-1, style 1007
should be used for the cable for 24V
AC Input Terminals.