Panasonic WV-7260D Operating Instructions Manual page 6

B. Control Connector 1 and 2
Connect the control connector 1 and 2 to the optional cable
WV-CA50 or the accessory connectors.
1.
2.
ө When extend the cable length, connect the remainded
wires to the ( ) position.
In case of using WV-CA50
The appearance and cord length is shown in
drawing.
In case of connecting the outdoor housing to the
pan/tiit unit WV-7260D, refer to the following table.
CN Pin WV-7135
Usage of Terminal WV-7140 WV-7150D| WV-7180D
PAN LEFT
PAN RIGHT
TILT UP
FAN HEATER
TILT DOWN
DEFROSTER
WIPER
LENS DC Common
LENS IRIS
LENS FOCUS
LENS ZOOM
CAMERA 24V AC
AC Common
AC Common
AC Common
CAMERA Ground
осооо ooooo
ooooo
авв
ШЕГЕН ІШІ" БЕНЕН
[3 ewm 2"
[s mme o
[ L s еен
о
о
о
о
о
о
о
о
о
o
о
the СМ CN2
The accessory connectors view from wiring side.
The each wire gauge of the outdoor housings can be
determined by the chart below.
WLI
То WV-7T260D 4 The system should be operated by 24V AC and the
272%» power consumption should have less than 11W for the
camera, 78W for the heater and 20W for the wiper.
WV-7135 or WV-7140 + WV-7260D:
To camera
power
WV-7260D
е The wire guage сап be determined by the chart below.
WV-7135/WV-7140
AWG size Conductors
UL 1007
UL 1015