User Settings - AEG Protect D 1000 LI-ION User Manual

68
card
Restore
factory
settings
Settings
UPS info
Identification
Information
BMS information includes voltage, current, SOC, SOH, battery
capacity, Firmware version of all batteries.
BMS auto setup, UPS will automatically identify the connected lithium
battery only when it is powered on and keep communicating with them.
If the number of BMS changes after UPS is powered on, you need to
select the "BMS auto setup" option under the LCD control menu to re-
identify the number of BMS, otherwise it will affect the estimate of the
actual discharge time.

4.4 User settings

Submenu
Change language
User password
Audible alarms
Output voltage
Output frequency
High efficiency mode
Restore to default factory settings
Refer to User settings
Product name, Serial number, firmware
version
IP/MAC address
Available settings
English, Italiano, Français, Deutsch,
Español, Русский, Polski,
[enabled, ****], [disabled]
[enabled], [disabled]
[200V], [208V], [220V], [230V], [240V]
[autosensing], [converter 50Hz, 60Hz]
[disabled], [enabled]
Default settings
English
简 体 中 文
enabled
enabled
[230V]
autosensing
disabled