Scanner Problems; The Status Light Is Flashing; The Scanner Does Not Turn On - Epson Perfection V600 Photo User Manual

Home > Solving Problems

Scanner Problems

The Status Light Is Flashing

The Scanner Does Not Turn On

The Scanner Turns Off
You Cannot Start Epson Scan
Pressing a Scanner Button Does Not Start the Correct Program
The Status Light Is Flashing
The green and orange status lights are on the left of the
buttons.
Color Indicator
Status
Green
On
Flashing
Orange
Flashing
Blue
Flashing
(None)
Off
The Scanner Does Not Turn On
Make sure your scanner's AC adapter is securely connected to the scanner and a working electrical outlet.
Make sure the electrical outlet works. If necessary, test it by plugging in another electrical device and turning it on.
The Scanner Turns Off
Make sure the Power Off Timer is set. For more details, see
This product will enter sleep mode after a period of nonuse. The time interval has been set at the factory to ensure
that the product meets Energy Star standards of energy efficiency, and cannot be modified by the consumer.
PDF button and the blue status light is on the bottom of the four
Meaning
Power is on.
Entering power saving mode.
An error has occurred.
Make sure the scanner is connected to your computer properly. See the
Start Here sheet for instructions on connecting the scanner to your
computer.
Make sure the scanner software is fully installed. See the Start Here sheet
for instructions on installing the scanner software.
Turn off the scanner using its power switch, then turn it on again. If the
Status light is still flashing orange, the scanner may be malfunctioning, or
the scanner light source may need to be replaced. See
Support for details.
Initializing or scanning.
The scanner is off.
Power Off Timer Setting.
Epson Technical
Top
Top