Battery Instructions - Black & Decker Bfdtd12Vw Instruction Manual

SET UP & USE

BATTERY INSTRUCTIONS

Batteries Not Included
Step 1: Using a small Philips Head screwdriver, remove the screw by turning
counterclockwise until it releases from the remote.
Step 2: Press down on the battery cover and slide it out.
Step 3: Insert 2 AAA batteries (not included), making sure "+" and "-" are facing the
correct direction.
Step 4: Once battery is installed, push battery cover closed.
Step 5: Again, using the small Philips Head screwdriver, add the screw back by turning
clockwise until it is locked in place
Page 11