Related Manuals for Kraus Elavo KCU-241
Summary of Contents for Kraus Elavo KCU-241
- Page 1 I N S TA L L AT I O N MA N UA L Elavo™ White Ceramic Small Rectangular Undermount Bathroom Sink w/ Overflow KCU-241 www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV. August 13, 2015...
- Page 2 Thank you for purchasing Kraus We would like to take this opportunity to thank you for your business with Kraus USA. It is our sincere hope that you are completely satisfied with your experience. We welcome any questions or comments you may have, and will be glad to assist you in the future.
-
Page 3: Prior To Installation
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. • Inspect the sink prior to installation to make sure it has not been cracked or chipped during shipping •... - Page 4 Jig Saw Phillips Screwdriver Putty Knife Tape Measure Pencil Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Ceramic Undermount sinks with countertop materials other than wood, marble, or granite Parts List (Included) • Cut-Out Template • Mounting Hardware...
- Page 5 Dimensions 20.86”L x 14.37”W x 8.1”H Ø1.77” Ø1.77” 45mm 45mm Ø1.77” 45mm Top View Bottom View Front View Side View...
- Page 6 1. Cut paper template • Use scissors to cut along the inside line of the paper template Clip Location Rim of Lavatory Cut Along This Line 17.7” (450mm) 2. Trace template • Compare cut template with sink to ensure proper size •...
- Page 7 Clip Location Rim of Lavatory Cut Along This Line 17.7” (450mm) Step3 3. Cut countertop • Cut the countertop opening by carefully following the pencil line traced from the template Please use the appropriate saw that best fits your countertop NOTE: material...
- Page 8 4. Install anchors • Flip countertop over and place on a foam pad for protection. Use cutout template to mark the anchor placement on the countertop. Drill 5/16” diameter x 3/8” deep hole in countertop • Place epoxy in the drilled hole. Insert brass nut anchors into the drilled hole and wait until the epoxy cures NOTE: •...
- Page 9 Clip Location Rim of Lavatory Cut Along This Line 5. Install sink 14.25” (362mm) • Use a bead of clear silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the opening in the countertop. Place sink over cutout hole and press firmly •...
-
Page 10: Conditions And Exclusions
If Kraus is unable to provide a replace- ment and repair is not practical or cannot be made in timely fashion, Kraus may elect to refund the purchase price in exchange for the return of the product. - Page 11 NON-APPLICABILITY OF THIS WARRANTY By the purchase and use of our products, you agree that Kraus is not liable for incidental, consequential or special damages associated with the return, replacement, installation or use of your product. This includes freight costs, cartridge replacement, labor, travel time,...
- Page 12 www.kraususa.com...
Need help?
Do you have a question about the Elavo KCU-241 and is the answer not in the manual?
Questions and answers