Page 4
CONTACT INFORMATION & AFTERHOURS SUPPORT CONTACT INFORMATION AFTERHOURS TECHNICAL SUPPORT INSTALLATION VIDEO LINKS NOTICE: CHILLER WARRANTY REQUIRES ACTIVATION...
INSTALLATION REQUIREMENTS LOCATION Air cooled Ensure minimum clearance* between condenser intake side and any buildings, walls, etc. No walls or obstructions in front of the BLOCK unit: Louvered access side must be open to free air. *AIR INTAKE SIDE MINIMUM Liquid cooled CLEARANCE REQUIREMENTS ELECTRICAL...
INSTALLATION GUIDE USER MANUAL S S INGLE & DUAL STAGE MODELS PIPING RECOMMENDATIONS drawing on the next page shows Supplemental details and additional recommendations are listed here: Insulate supply and return piping Use closed-cell foam insulation Install protective cladding typical for cold glycol/water systems Verify operating temperatures High temp systems may require copper or stainless steel piping rue union or flanged...
Page 9
INSTALLATION GUIDE USER MANUAL CONTROLLER AND NAVIGATION GD-MNL_SD_CM-R202...
Page 10
c.pCO Carel Mini Alarms Alarm Code Displayed Text Description Type Response...
Page 11
10 Easy Steps to Start-up Your New G&D Chiller Standard hiller : GD- 3H, 5H, 7H, 10H, 13.5H, 5x5H, 7x7H Scroll hiller : GD-7.5T-1HA, 10T-1HA, 15T-2HA Please view install videos online at www.gdchillers.com/installation-videos Your chiller one (1) free year of Tera service for remote monitoring with at least 24-30 inches of clearance on air intake side open to free air on exhaust side...
Page 12
WARRANTY START-UP CHECKLIST FOLLOWING START-UP OF CHILLER, PLEASE SEND A COPY OF COMPELTED FORM TO G&D TECH SUPPORT GD-MNL_SD_CM-R2021A...
SEQUENCE OF OPERATION MAINTENANCE Please contact G&D Technical Support 800-555-0973 The following tasks can be performed without the need for specialized equipment or training: WARNING: DO NOT ATTEMPT TO SERVICE ELECTRICAL COMPONENTS OR MAKE ADJUSTMENTS IN ELECTRICAL PANEL WITHOUT PROPER TRAINING AND IMPLEMENTATION OF LOCKOUT/TAG-OUT SAFETY PROCEDURES GD-MNL_SD_CM-R202...
**TO ACTIVATE WARRANTY, FILL OUT STARTUP CHECKLIST AND RETURN WITHIN 30 DAYS** WARRANTY STATEMENT TWO-YEAR LIMITED WARRANTY ON PARTS, ONE-YEAR LIMITED WARRANTY ON LABOR EXCHANGE REPAIR: PARTS AND LABOR REMAINING WARRANTY EXCLUSIONS ASSIGNMENT OF WARRANTIES DISCLAIMER OF WARRANTY...
Page 19
DISCLAIMER OF LIABILITY SEVERABILITY HOW TO OBTAIN WARRANTY SERVICE (PRE-AUTHORIZATION REQUIRED) GD-MNL_SD_CM-R202...
Need help?
Do you have a question about the GD-1.5H and is the answer not in the manual?
Questions and answers