QJMOTOR SRK700 Owner's Manual
  1. Manuals
  2. Brands
  3. QJMOTOR Manuals
  4. Motorcycle
  5. SRK700
  6. Owner's manual

QJMOTOR SRK700 Owner's Manual

Hide thumbs Also See for SRK700:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRK700 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for QJMOTOR SRK700

Summary of Contents for QJMOTOR SRK700

  • Page 2 PREFACE Welcome to the world of motorcycling! As the owner, you are benefiting from the vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned us a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all advantages of your vehicle.
  • Page 3 IMPORTANT NOTES 1． Rider and passenger The motorcycle is designed to be used by only one rider and one passenger. 2． Road conditions for riding This motorcycle is suitable for riding on-highway. 3. Please read this operation and maintenance manual carefully. Following the break-in instructions in this manual will keep your motorcycle running stably and allow the engine to reach its full performance.

  • Page 4: Special Notice

    SPECIAL NOTICE Warning: this motorcycle is equipped with a main fuse that must meet the standard requirements to run safely. DO NOT use fuses of incorrect specifications or other conductive objects; otherwise it will lead to damage to parts, fire, and/or a serious accident. Pay special attention: *When installing or replacing the battery for the first time, pay attention to distinguish between positive and negative connections.
  • Page 5 QJMOTOR Motorcycle will not bear all quality problems and consequences (including loss of warranty) caused by users' unauthorized modification or replacement of unauthorized parts.

  • Page 6: Table Of Contents

    Riding Motorcycle…………………………………………13 Table of Contents Engine Starting………………………………………………13 Setting off …….……………………………………………13 PREFACE IMPORTANT NOTES Shifting gears………......….…………………13 SPECIAL NOTICE Riding on a slope...…………………………………………13 Use of brakes and parking……………………………… 14 Safety Precautions for Motorcycles………………….……… 1 Inspection and Maintenance……………………………15 Safe riding tips..……………………………..…………..1 Maintenance schedule……………………………………15 Protective apparel………………………………………...
  • Page 7 OWNER’S WARRANTY RESPONSIBILITIES .....29 Reporting Safety Defects.............35 California Proposition 65 Warning........36...

  • Page 8: Safety Precautions For Motorcycles

    Safety Precautions for Motorcycles and operating performance of the motorcycle, especially the Safe riding tips overload of electrical system. may easily cause danger. 1. The motorcycle must be inspected before riding, to avoid Protective Apparel accidents and damage to parts. 1.

  • Page 9: Motorcycle Serial Number

    Motorcycle serial number Parts Locations Frame numbers and engine numbers are used to register motorcycles. When ordering accessories or entrusting special services, this number enables the distributor to provide you with better service. Please record the number for reference. Frame VIN number engraved position: right side of frame ○...

  • Page 10: Instruments

    Instruments Note: the above picture is for reference only, and the actual vehicle you purchased may vary.
  • Page 11 ⑴ Left turn signal indicator The left turn signal light indicator will flash accordingly when the turn signal is turned to the left. ⑵ Right turn signal indicator The right signal light indicator will flash accordingly when the turn signal is turned to the right. ⑶...
  • Page 12 It displays the current time. If you need to adjust the time, not off, the oil pressure may be abnormal, and the engine see the Instrument adjustment button below for details. should be shut down for inspection. The oil light will come on ⒀...

  • Page 13: Operation Guide

    after 10 seconds of non-operation). removed. When viewing the total mileage (TOTAL), , press the ENTER “ON" Mark: Turning the key to the "ON" button for more than 10 seconds, and the "speedometer" and marked position, the power is turned on, "odometer"...

  • Page 14: Clutch Lever Adjustment

    switch According to the needs of operating comfort, the position of Press this switch to adjust between the high and low beam clutch lever can be adjusted by adjusting the adjuster knob via lights. " " when in this position, the headlight high beam is lit, the ring nut.
  • Page 15 (3) Electric start button Fuel inspection, replenishment Press the electric start button, the electric motor turns, When the fuel gauge flashes in the speedometer, you starting the engine. should refuel. When refueling, first open the fuel tank cover dust cover 1, Note: and then insert the key and rotate Do not continuously operate the electric start button for...

  • Page 16: Shifter Lever

    Do not forget to lock the lid of the fuel tank to Rear brake pedal prevent excessive evaporation of fuel into the atmosphere, Step on the rear brake pedal which wastes energy and pollutes the environment. and the rear brake light will be Sparks or flame are strictly prohibited when refueling.

  • Page 17: Bank Angle Sensor

    The rear shock absorber is mainly composed be used to charge components such as mobile phones. of shock absorber spring and spring preload adjuster, which can be adjusted according to the rider's needs, road conditions, and to stabilize Instructions for the use of fuel and oil frame side bracing.

  • Page 18: Break-In

    Please go to an SSR Motorsports authorized dealer to buy at 1000 mi Below 6500 rpm this motorcycle oil. The oil viscosity should be determined above 1000 mi Below 8000 rpm according to the temperature of the riding area, and the Warm up the oil before riding appropriate oil viscosity can be selected with reference to the Before starting, and after starting at high temperature or low...

  • Page 19: Riding Motorcycle

    the inspection items before riding. Riding the motorcycle Item Inspection Starting the Engine 1) Stability Rotate the ignition switch key to the "ON" position on the 2) flexible rotation Handlebar 3) No axial movement and loosening switch. 1) The handle and brake pedal have the If the transmission is in a neutral position, the neutral correct clearance indicator will also be lit.

  • Page 20: Shifting Gears

    begin to move forward. Warning: Shifting gears Using only the front brake or rear brake is dangerous and The transmission will allow the engine to run smoothly may cause skidding or losing control. Be particularly careful and within the normal operating range. The driver should choose the use dense multi-point braking on slippery roads and all bends.

  • Page 21: Inspection And Maintenance

    Inspection and maintenance The regular maintenance time limit for the number of miles driven is shown in the table below. At the end of each time limit, inspection, inspection, lubrication and required maintenance must be carried out in accordance with the specified methods.
  • Page 22 Maintena Period Odometer reading (note 2) mileage Content NOTES. 600mi 2500mi 4400mi 6200mi 8700mi 11000mi Item Brake wear Braking system I 、 A I 、 A I 、 A I 、 A I 、 A I 、 A Headlight beam adjustment Clutch adjustment Side stand...

  • Page 23: Oil Level And Oil Replacement

    Oil level and oil replacement filter (2) according to the following steps: Check the engine oil level before special filter removal tool starting the engine. When checking to rotate the filter counterclockwise, and remove the oil filter that the oil level , stand the vehicle needs to be replaced.

  • Page 24: Spark Plug

    Spark plug A ○ is the pull throttle cable B ○ is the return throttle cable. Please follow During the first 600 miles of operation, and these steps to adjust the free play every 3700 miles driven, the carbon deposits of the throttle grip: attached to the spark plugs need to be removed (1) Slide back the throttle...

  • Page 25: Engine Idle Speed Adjustment

    The service life of the drive chain depends on proper (2) Loosen the lock nut 1. lubrication and adjustment. Improper maintenance may lead to (3) Spin in or out the adjustment screw (2) to make the premature wear of drive chains and sprockets. In harsh use, it clutch free play equal the prescribed requirements.

  • Page 26: B R A K E

    28~35mm, the rear axle nut should be tightened and a final The front wheel and rear wheel of this vehicle uses disc inspection should be carried out. brakes. Correct braking operation is very important for safe riding. Note: Remember to check the braking system on a regular basis, and this inspection should be carried out by an authorized dealer.

  • Page 27: Tires

    Brake fluid Warning: As the brake pads wear out, the brake fluid in the cylinder If the brake system or brake pads need to be repaired or will be automatically injected into the brake hose, resulting replaced, we suggest that you have the work performed by a in a decrease in the liquid level.

  • Page 28: Seat Removal And Installation

    (3) Replace the air filter element with an OEM damage to the wheel, which may lead to loss of control and an replacement. accident. It is dangerous to operate a motorcycle with (4) Reinstall the components in reverse order of disassembly. excessively worn out tires, this leads to a loss of traction while riding that could lead to an accident.

  • Page 29: Coolant

    of the reservoir is below the lower limit mark, remove the right on, it should be replaced immediately, do not wait until the side cover screws (4) from the side cover, pull the rear corner of maintenance period. the side cover to disengage the tab, then remove the side cover Starting the engine without an air filter installed will cause and set it aside, you can see the coolant reservoir cap (5), open dirt to enter the cylinder and damage the engine.

  • Page 30: Radiator Hose Clamp Assembly And Disassembly

    Note: Follow the diagram to the The catalytic converter is located inside the muffler which right when connecting parts of the is a high temperature area, do not touch. fuel system after a service or part Carbon canister replacement. This model is equipped with a motorcycle fuel evaporation Parts lubrication control device: carbon canister.
  • Page 31 The battery is located under the rider's seat. The battery removed and placed separately, the voltage is tested every three equipped with this vehicle is valve-controlled sealed lead-acid months, and recharging is carried out when the voltage is lower battery, do not at any time remove the battery cap. There is no than 12.6V.

  • Page 32: Replacement Of Fuse

    Replacement of fuses Warning: The main fuse (1) is The battery will produce flammable gas when it is used located on the starting relay and charged, do not approach open fire or spark when and is located under the right charging.

  • Page 33: Replacement Of Light Source

    will reduce the right headlight high/low beam at the same time; ABS operation and maintenance instructions rotating the height adjuster (2) counterclockwise will increase the Turn on the ignition switch and the ABS indicator on the right headlight high/low beam light at the same time. dashboard will turn on (not flashing), which is normal.

  • Page 34: Storage Guidelines

    Storage Guidelines plugged into the cap and grounded to prevent damage to the Storage ignition system. 5. Remove the battery and store it separately in a place If storing your motorcycle for a long period of time, it is necessary to perform certain maintenance measures to reduce the protected from freezing and direct sunlight.

  • Page 35: Specifications And Technical Parameters

    SRK700 Specifications and technical parameters Brake Size and weight Front braking mode……………………………….……………..……… Manual disc brake (ABS) Length…………………………………………………………………………………..………2070mm Rear braking mode………………………………………………..……… Pedal disc brake (ABS) Width………………………………………………………………840mm / 790mm(Optional) High…………………………………………………………………………………….………1130mm Tire Wheel­base……………………………………………………………………………………1410mm Front tire specification…………………………………………………………………… 120/70ZR17 Curb weight………………………………..…………………………………………432lbs. Rear tire specification…………………………………….……………...………………… 160/60ZR17 Engine Type………………………………………………….……..…...
  • Page 36 YOUR WARRANTY RIGHTS AND OBLIGATIONS ignition system, catalytic converter and engine computer, if it is equipped. Also included may be The California Air Resources Board, the U.S. hoses ,belts, connectors and other Environmental Protection Agency, and Hua Mei emission-related assemblies. Motor USA LLC.
  • Page 37 OWNER’S WARRANTY RESPONSIBILITIES rights and responsibilities, you should contact Hua As the vehicle owner, you are responsible for the Mei Motor USA LLC, 270 TRACE COLONY PARK STE performance of the required maintenance listed in B, Ridgeland, MS 39157,TEL: (866) 222-1558 or (for your owner’s manual.
  • Page 38 States Environmental Protection Agency or the available service establishment, or by the owner, California Air Resources Board for the periods using any replacement part. Hua Mei shall specified above. reimburse the owner for his or her expenses including diagnostic charges, not to exceed Hua I.Coverage.
  • Page 39 state’s Emission Warranty Parts List. These maintenance in the owner’s manual is warranted warranted parts are: carburetor and internal parts; for 12,000 km or for 5 years, whichever first occurs, intake manifold; fuel tank; fuel injection system; prior to the first scheduled replacement point for spark advance mechanism;...
  • Page 40 In the state of California only, Hua Mei will warrant Any vehicle equipped with an odometer or the damages to other vehicle components hour meter on which the odometer mileage or proximately caused by a failure under warranty of hour meter reading has been changed so that any warranted part.
  • Page 41 limitation of any incidental or consequential you may also have other rights which vary from damages, so the above limitations may not apply state to state. to you. No express emission control system warranty V.THIS EMISSION CONTROL SYSTEM is given by us except as specifically set forth herein. WARRANTY IS IN ADDITION TO THE Any emission control system warranty implied by STANDARD LIMITED WARRANTY FOR ALL...
  • Page 42 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National High way Traffic Safety Administration (NHTSA) in addition to notifying QJMOTOR. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
  • Page 43 California Proposition 65 Warning Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
  • Page 44 Part Number: 02401P810003...

Table of Contents