Do Not Use An Extension Cord - Everstar MPA-08CR Instruction Manual

Window Kit Installation
Your window kit has been designed to fit most
standard "vertical"and "horizontal" window
applications. However,
you to improvise/modify some aspects of the
installation procedures for certain types of
windows. Please refer to Fig. 2 & Fig. 2a for
minimum and maximum window openings.
Water Tank Safety Feature
This unit is equipped with a fail-safe switch
mechanism which prevents the unit from condensing
water in the event the water tank is accidentally
displaced, and/or FULL
occurs, the unit will signal
WATER FULL indicator light will flash red
continuously until the water tank is correctly
positioned and/or emptied.
NOTE: The fan motor will continue to operate
under this condition. This is normal, but no
cooling or dehumidifying will occur until the tank
is emptied and/or correctly installed (It may take
several minutes before the compressor resumes
normal operation).
Window Installation
Before Starting This Unit
1) Select a suitable location, making sure you have
easy access to an electrical outlet.
2) Install the Flexible Exhaust Hose
Adjustable Window Slider Kit
Fig. 3 & Fig. 3a.
NOTE: Step 2 is required only while using the
AIR CONDITIONER MODE
3) Plug the unit into a 115V/60Hz grounded
electrical outlet.

DO NOT USE AN EXTENSION CORD.

4) Make sure the Water Tank
inside the cabinet otherwise the unit will not
operate. Fig 4.
5) To turn the unit on, press the
(On/ Off Switch).
it may be necessary for
with water. If this situation
8 BEEPS and the
and the
as depicted in
is correctly positioned
I/O key
Horizontal Window
Window Slider Kit
5
Minimum: 26 / "(67.5 cm )
8
3
Maximum: 48 / "(123cm)
8
Vertical
Window
Fig. 3
5
Fig. 2
Fig. 2a
Window Slider Kit
5
Minimum: 26 / "(67.5 cm )
8
3
Maximum: 48 / "(123cm)
8
Fig. 3a
Fig. 4