Connecting The Power Cord - Pioneer CT-W404R Operating Instructions Manual

CONNECTIONS
• This illustration shows CT-W504R.
Recording
connection
cord _ _ _PloorandYbeact ,kon
I .Ec _*llJ/,
TAPE REC/PLAY
jacks
Remotel::n_r_[ _i_
CD • DECK SYNCHRO
control cord
(CT-W504R only)
I° ° ° O'1
v v
Stereo Amplifier
CONTROL OUT ack
Compact Disc Player
CD • DECK SYNCHRO
jack
• Read through the operating instructions of the stereo compo-
nents which you intend to connect to this unit.
• Turn the power on only after making all of the connections.
• Make sure that all of the connection plugs are inserted securely,
as improper connections may generate noise.
I CONNECTING THE RECORDING AND PLAYBACK CORDS
1
Left channel _..._e plug
Right channel_ "" c_2_
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the deck
to the recording (output) jacks of the amplifier, and the PLAY (OUT-
PUT) jacks of the deck to the play (input) jacks of the amplifier.
• Connect the plugs properly:
Left channel -- White plug
Right channel -- Red plug
I D • DECK SYNCHRO RECORDING
(CT-WSO4R only)
• CD • DECK SYNCHRO recording can be carried out when this
unit is connected to a Pioneer CD player equipped with a CD -
DECK SYNCHRO jack.
Connection
Connect the CD • DECK SYNCHRO jack of this unit to the CD •
DECK SYNCHRO jack of the CD player using the supplied CD •
DECK SYNCHRO control cord.
6
<RRB1155>
En
NOTES:
• Keep the input and output jacks connected between the amplifier
and this unit, otherwise, the CD • DECK SYNCHRO recording
cannot be carried out.
• Even when the CD player is connected to the amplifier with an
optical fiber cable, connect the CD player to the ampfifier or this
unit with the input and output cords that have pin plugs.
I
PIONEER SYSTEM REMOTE CONTROL
I
CONTROL IN jack (CT-WSO4R/CT-W404R/CT-W204:
Australian models only)
Use the enclosed Remote Control Cord to connect this jack to the
CONTROL OUT jack of another component which bears the [] mark
(indicating that it is equipped with PIONEER System Remote Con-
trol). You will then be able to operate this unit using the Pioneer sys-
tem remote control unit. If the remote control unit does not have
separate buttons for deck I and deck II, or a selection button to
choose deck I or deck II, the buttons will only operate deck II. To
operate deck I with a remote control unit which was not designed
for double deck cassette players, see page 8.
CONTROL OUT jack
Intermediary jack which outputs signals from the CONTROL IN jack
of this unit to the input jack of another unit. Connect this jack to the
CONTROL IN jack of another component compatible with Pioneer
System Remote Control.
NOTE:
Be sure to connect both of the control cord's plugs securely to the
CONTROL IN and CONTROL OUT jacks. Do not connect only one
end of the cable.
CONNECTING THE POWER CORD I
Insert the power cord of the cassette deck into the accessory AC
outlet of your amplifier, or into a normal household outlet.