Hitachi D-E99 Operating Manual page 11

Semiconductors:
Track System:
Tape:
Tape Speed:
Recording system and Bias Frequency:
Erasing System:
Erase Ratio:
Frequency Response:
S/N (Signal to Noise Ratio):
Wow & Flutter:
Input Sensitivity and Impedance:
Output level:
Output Load Impedance:
Distortion:
Crosstalk:
Power (Mains) Supply:
Power (Mains) Consumption:
Dimensions:
Weight:
Modules: 5
FETs: 2
ICs: 11
Transistors: 58
Diodes: 58
LEDs: 14
4 track 2 channel stereo
Cassette tape
4.75 cm/s
AC bias, 105 kHz
AC erase
65 dB (at 1 kHz) or more
NOR-I: 20 Hz to 19 kHz
25 Hz to 18 kHz
(According to DIN 45 500)
20 Hz to 21 kHz
25 Hz to 19 kHz
(According to DIN 45 500)
20 Hz to 19 kHz
25 Hz to 18 kHz
(According to DIN 45 500)
METAL-W: 20 Hz to 21 kHz
25 Hz to 20 kHz
(According to DIN 45 500)
CrO2-II:
FeCr-Iil:
T.H.D. Metal Tape.
Dolby C NR ON: 75 dB According to DIN 45 500.
A weighted, Reference 3%
Dolby NR OFF: 61 dB THD Metal Tape. )
According to DIN 45 500.
0.032% (WRMS)
0.10% (According to DIN 45 500)
Microphone: 0.4 mV
(Suitable microphone impedance
300 ohms to 5 kohms)
Line in: 100 mV, 50 kohms
0.5V or more (adjustable)
Line out: 50 kohms
Headphone: 8 ohms to 2 kohms (Suitable)
Less than 0.8% (1 kHz, 160 nWb/m)
60 dB (at 1 kHz) or more
AC 100—110V, 115—127V,
200 —220V, 230—250V, 50/60 Hz
29W
110(H) x 435(W) x 282(D) mm
6.3 kg