VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.progress-hausgeraete.de/support CONTENTS 1. SAFETY INFORMATION...................2 2. SAFETY INSTRUCTIONS.................4 3. INSTALLATION....................5 4. PRODUCT DESCRIPTION................6 5. CONTROL PANEL.................... 7 6. PROGRAMME SELECTION................8 7. BASIC SETTINGS ..................10 8.
Page 3
Children of less than 3 years of age should be kept away • from the appliance unless continuously supervised. Children should be supervised to ensure that they do not • play with the appliance. Keep detergents away from children. • Keep children and pets away from the appliance when the •...
The appliance is to be connected to the water mains using • the new supplied hose-sets. Old hose sets must not be reused. 2. SAFETY INSTRUCTIONS 2.1 Installation Make sure that there is access to the mains plug after the installation. •...
• Dishwasher detergents are dangerous. sensors, software and firmware including Follow the safety instructions on the reset software. Please note that some of detergent packaging. these spare parts are only available to • Do not drink and play with the water in the professional repairers, and that not all appliance.
3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury. After installation, make sure the plastic covers are locked in position. Damage or removal of the plastic covers on the sides of the door may impact the functionality of the appliance and may cause an injury.
Rinse aid dispenser The graphic is a general overview. Detergent dispenser For more details, refer to other chapters Cutlery basket or documents provided with the Lower basket appliance. Upper basket 5. CONTROL PANEL On/Off button/Reset button Extra power button Delay start button AUTO programme button Indicators Programme buttons...
6. PROGRAMME SELECTION 6.1 Programmes consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes. 6.2 AUTO This programme automatically adjusts the dishwashing cycle to the type of load. The appliance senses the degree of soil and the amount of dishes in the baskets.
Page 9
Programme Dishwasher Degree of Programme phases Options load soil Crockery, cut‐ Normal, lightly • Prewash • Extra power lery, pots, pans dried-on • Dishwashing 50 °C • Intermediate rinse • Final rinse 55 °C • Drying • AirDry AUTO Crockery, cut‐ •...
7. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Num‐ Settings Values Description 1) Water hardness From level 1 to Adjust the level of the water softener according to level 10 (default: the water hardness in your area. Rinse aid empty On (default) Activate or deactivate the rinse aid indicator.
Page 11
Use OK to enter the selected setting and to 4. Press OK to confirm the setting. confirm changing its value. • The new setting is saved. • The appliance returns to the setting How to change a setting selection. 5. Press and hold simultaneously 30min Make sure the appliance is in setting mode.
Page 12
Regardless of the type of detergent used, additional 4 litres and the total energy set the proper water hardness level to consumption of a programme by additional 2 keep the salt refill indicator active. Wh. The rinsing of the softener ends with a complete drain.
CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. CAUTION! If children have access to the appliance, we advise to deactivate AirDry. The automatic opening of the door may pose a danger.
CAUTION! The compartment (A) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 6. Turn the cap clockwise to close the salt container. 1. Press the release button (D) to open the lid (C).
Page 15
1. Press the release button (B) to open the lid (C). Extra power is not a permanent 2. Put the detergent, in powder or tablets, in option and must be activated every time the compartment (A). before you start a programme. 3.
9.8 How to cancel a running 9.10 The Auto Off function programme This function saves energy by switching the appliance off when it is not operating. Press and hold for about 3 seconds. The function comes into operation The appliance returns to the programme automatically: selection.
Page 17
10.2 Using salt, rinse aid and 10.4 Before starting a programme detergent Before you start the selected programme, make sure that: • Only use salt, rinse aid and detergent designed for dishwasher. Other products • The filters are clean and correctly can cause damage to the appliance.
11. CARE AND CLEANING • Do not use abrasive products, abrasive WARNING! cleaning pads, sharp tools, strong chemicals, scourer or solvents. Before any maintenance other than • Wipe clean the door, including the rubber running the programme Machine Care, gasket, once a week. deactivate the appliance and disconnect •...
Page 19
5. Make sure that there are no residues of food or soil in or around the edge of the 1. Turn the filter (B) counterclockwise and sump. remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
Page 20
3. To install the spray arm back, press it CAUTION! downwards. An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
12. TROUBLESHOOTING Refer to the below table for information on WARNING! possible problems. With some problems, the lights related to the Improper repair of the appliance may programme buttons flash intermittently to pose a danger to the safety of the user. indicate a malfunction and the alarm code.
Page 22
Problem and alarm code Possible cause and solution Malfunction of the water level de‐ • Make sure that the filters are clean. tection sensor. • Switch the appliance off and on. • The lights related to the pro‐ gramme buttons flash 4 times intermittently.
Page 23
Problem and alarm code Possible cause and solution Small leak from the appliance • The appliance is not levelled. Loosen or tighten the adjustable feet door. (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
Page 24
Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Acti‐ vate the function AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the dosage of rinse aid to a higher level.
Problem Possible cause and solution Limescale deposits on the table‐ • The level of salt is low, check the refill indicator. ware, on the tub and on the inside • The cap of the salt container is loose. "The water softener" of the door.
For more detailed information about the energy label, visit www.theenergylabel.eu. 14. ENVIRONMENTAL CONCERNS appliances marked with the symbol with Recycle materials with the symbol . Put the the household waste. Return the product to packaging in relevant containers to recycle it. your local recycling facility or contact your Help protect the environment and human municipal office.
Need help?
Do you have a question about the PV3572 and is the answer not in the manual?
Questions and answers