Frigidaire FRA12EZU2 Installation Instructions Manual page 6

NOTE:
Dimension for depth depends on wall thickness and type of molding
(FIG.21).
Do not block louvers in air conditioner cabinet.
Install Cabinet into Wood Frame:
2. Use a level to check that cabinet is level side to side (FIG.23).
3. Check that air conditioner cabinet is tilted to the outside so that water could run to the outside. The cabinet should
slop at least half-a-bubble towards the rear.
4. Reuse the insulation to seal opening between cabinet and frame.
frame.
6. Caulk all outside wall openings around cabinet.
NOTE:
Do not overtighten screws or the cabinet will distort and provide a poor air seal between cabinet and air
conditioner.
A
Complete Installation:
1. Insert air conditioner into cabinet (FIG.24).
2. Reconnect electronics plug if present. Insert front tabs of front panel into top of cabinet and swing front into
4. Plug into a grounded 3 prong outlet.
NOTE:
Handle the air conditioner gently .
For through-the-wall installations, if needed, install molding around the room side of cabinet.
FIG.24
6
Installation Instructions
FIG.22
B
B. Trim
electronics plug
FIG.21
A. Outside width
B. Outside height
FIG.23
A
B
C
C. Depth
A
A. level