Advertisement
Available languages
Available languages
Connecting the ANT1600
You can connect the ANT1600 directly to your TV or use it with a converter box.
Built-In
2
Coaxial Cable
TV
3
Built-In
Coaxial Cable
2
Converter Box
4
3a
Audio/Video
Coaxial
–or–
Cables
TV
To connect the ANT1600 directly to your TV:
ANT1600
1. Make sure your TV is turned off.
2. Connect the ANT1600's built-in coaxial cable to the
antenna input on your TV.
3. Re-scan for channels on your TV.
To connect the ANT1600 to a converter box:
1. Make sure your TV is turned off.
ANT1600
2. Connect the ANT1600's built-in coaxial cable to the
antenna input on your converter box.
3. Connect the converter box to your TV using either
audio/video cables or a coaxial cable:
a. Audio/Video cable connection: Connect the video
3b
(yellow) and stereo audio (red and white) cables
Cable
to the video and audio outputs on your converter
box. Connect the other ends to the video and audio
inputs on your TV. Make sure you match the colors
of the jacks on each—yellow plug to yellow jack, red
plug to red jack, and white plug to white jack.
b. Coaxial cable connection: Connect a coaxial
cable to the antenna output on your converter box.
Connect the other end of the coaxial cable to the
antenna input on your TV.
4. Re-scan for channels on your converter box.
Notes: See your converter box's owner's manual for more
detailed connection instructions. For additional information
about setting up your converter box, visit www.keepmytv.com
3
Advertisement
