Dump The Collected Water; Bucket Drainage - Toshiba RAD-DIA17HK User Manual

DUMP THE COLLECTED WATER

There are two ways to remove collected water.
Type 1:

Bucket drainage

Bucket drainage
NOTE
· When you remove the bucket from the unit do not set the unit on any electrical components as the bottom
may be wet.
· Do not set the unit on an uneven surface afterremoving it from the bucket.
· Ensure the unit is seated properly after returning into the bucket.
· If the bucket is removed during operation, empty bucket icon on the display will blink and stop working
until the bucket is seated.
1
Pull out the bucket.
Grab the handle and pull out
the tank.
Page 12
When your product has been in use for a while.
Continuous drainage
Note: The drainage hose is optional
(Inner diameter) φ 13.5mm)
(Outer diameter) φ 16.5mm)
2
Open the cover.
Grab the clasp and pull up.
Type 2:
Water outlet
3
Pour the water out.
Pour the water out.
(from water outlet)