Toshiba RAD-DIA17HK User Manual page 31

Display
Shows Error codes and protection code: The unit
may stop operation or continue to run safely. If the
error codes appear, wait for about 10 minutes. The
problem may resolve itself. If not, disconnect the
power, then connect it again. Turn the unit on. If
the problem persists, disconnect the power and
contact your nearest customer service center.
Error code appears and begins with the letters as
the following in the window display of indoor
unit: EH(xx), EL(xx), EC(xx), PH(xx), PL(xx), PC(xx)
Electronic Work
WARNING:
BEFORE PERFORMING ANY ELECTRICAL
OR WIRING WORK, TURN OFF THE MAIN
POWER TO THE SYSTEM.
More features
Wireless operation(on some models):
• For the rst time to use Wi function, press the
POWER button for 3 seconds to initiate the Wi
connection mode. The LED DISPLAY shows 'AP'
to indicate you can set Wi connection. If
connection (router) is successful within 8
minutes, the unit will exit Wi connection mode
automatically and the Wireless indicator
illuminates. If connection is failure within 8
minutes, the unit exits Wi connection mode
automatically.
NOTE: The cographs are for
DISPLAY
explanation purpose only.
POWER
Your machine may be
MAIN
SUPPLY
CONTROL
slightly diferent.
CORD
The actual shape shall
prevail.
Page 11