Toshiba RAD-DIA17HK User Manual page 30

NOTE
When this function is selected, FAN speed
regulation is not available.
SET MODE
Press the Mode button and select Set mode.
When this mode is selected, it will display the
setting humidity for 5 seconds. After 5 seconds,
it will switch back to the ambient humidity
display.
CONT. MODE
Press the Mode button and select Cont. mode.
NOTE
When this function is selected, the setting
humidity will not be displayed. In this mode, the
setting humidity cannot be adjusted.
DRYER MODE
Press the Mode button and select Dryer mode.
NOTE
When this mode is selected, the continuous
dehumidi cation function is enabled and the
high speed FAN mode is accompanied. Setting
humidity and FAN speed cannot be adjusted in
this mode.
3.Up and Down buttons
Humidity Set Control buttons
In Setting dehumidifying mode, The humidity level
can be set within a range of 35%RH(Relative
Humidity) to 85%RH(Relative Humidity) in 5%
increments. Press and hold the
humidity drop continuously. Press and hold the
button the humidity rise conti-nuously.
4.TIMER Function
• Press Timer button, the TIMER indicator light
illuminates. lt indicates the Auto Start or Auto
Stop program is initiated. For some units,
continuing to press the Timer button will cancel
the timer settings.
• Press or hold the UP or DOWN button to change
the Auto time by 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining
until start.
Page 10
• The selected time will register in 5 seconds, and
the system will automatically revert back to
display the previous humidity setting or room
humidity when the unit is on. When the unit is of,
there is no display.
• Turning the unit ON or OFF at any time or
adjusting the timer setting to 0.0 will cancel the
Auto Start/Stop timed program.
5.PURIFY Function
Power ON/OFF, press this button to enter the PURIFY
function.
After the function is on, 3 seconds 'On' will be
displayed.
6.FAN Function
Press this button to switch between Turbo→High→
Comfort→Silence→Turbo Sets the FAN speed.
7.SWING Function
Press this button to turn on or of the SWING function.
8.ION Function
Press the FAN and SWING buttons at the same time
and continue for 3 seconds to enable/disable the
negative ion function.
NOTE
When you open the PURIFY Function, you can
switch this function ON/OFF.
9.Self-clean- Function
Turn this function ON/OFF by press the PURIFY
button for 3 seconds.
10.DISPLAY
In the startup state, press TIMER and MODE keys
and continue for3 seconds to turn on/of the
button the
digital display function.
11.Child Lock Function
Press Up and DOWN buttons for 3 seconds to lock
or unlock the control panel.