GET TO KNOW THE FEATURES
Control Panel
NOTE
The following control panels are for explanation purpose only. The control panel of the unit you purchased
may be slightly diferent according to the models.
When the machine is turned on or of, or when the mode is switched on, there will be a slightly obvious sound
of compressor operation, because the compressor frequency is increased or decreased, it is normal.
9
Indicator
1.POWER ON/OFF button
Press to turn the dehumidi er on or of.
NOTE
When the compressor startups or stops running,
the unit may make a loud voice, it is normal.
After each turn on, The negative ion function is
enabled by default.
2.MODE Function
Each time you press the MODE button, you can
cycle between:
ECO -Set-Cont.-Dryer-ECO mode.
4
10
11
5
2
Function
Wireless light
Fresh light
Display ON /OFF light
3
6
7
1
Indicator
NOTE
When switching mode or power on, it will
display the setting humidity for 5 seconds.
After 5 seconds, it will switch back to the
ambient humidity display.
ECO MODE
Press the Mode button and select ECO mode.
In Smart dehumidi cation mode, you can press the
UP and DOWN buttons to adjust the humidity.
The humidity range is 35% to 85%. The default
value is 60%.
Operation Display
8
Function
Water filled lamp light
Purification mode light
Child lock light
Page 9
Need help?
Do you have a question about the RAD-DIA17HK and is the answer not in the manual?