Toshiba RAD-DIA17HK User Manual page 25

CAUTION
• The manufactures nameplate is located on the rear panel of the unit and contains electrical and
other technical data speci c to this unit.
• Be sure the unit is properly grounded. To minimize shock and re hazards, proper grounding is
important. The power cord is equipped with a three-prong grounding plug for protection against
shock hazards.
• Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time delay fuse or circuit breaker(please
refer to the nameplate for the electrical data), have a quali ed electrician install the proper
receptacle.
• Do not operate your appliance in a wet room such as a bathroom or laundry room.
• The unit s circuit board(PCB) is designed with a fuse to provide overcurrent protection.
• The speci cations of the fuse are printed on the circuit board, such as: T3.15A/250V (or 350V), etc.
Page 5