Page 1
SLSUPB105 SLSUPB125 SLSUPB135 Thunder Wave SUP SLSUPB145 Stand Up Water Paddle-Board SLSUPB105 - SLSUPB125 - SLSUPB135 - SLSUPB145...
Page 2
INTRODUCTION IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY, AND IN ITS ENTIRETY, BEFORE INFLATING, ASSEMBLING OR USING YOUR THUNDER WAVE SUP. Please read this manual carefully before using this product. Familiarize yourself with the features of the SUP and ask for professional training if you are inexperienced in handling this type of board.
Page 3
WHAT’S WHAT? Carrying Handle Tie down Bungee Cords Air Valve SLSUPST15 Leash Plug Sup Seat *sold separately Fins www.PyleUSA.com...
Page 4
GETTING STARTED CONTENTS • Board x 1 • Bag x 1 • Repair kit x 1 • Hand pump x 1 • Leash x 1 • 3 piece SUP paddle x 1 INFLATING THE SUP BOARD 1. Roll out the SUP board until it is laying flat with top side facing up. 2.
Page 5
GETTING STARTED SUP BOARD MR PUMP Your SUP Board comes with a high pressure pump. This pressure pump, pumps low volume of air with each pump- ing motion. It takes longer to ll the board with air, but allows the board to reach a higher air pressure. This is good for achieving maximum performance from the board.
GETTING STARTED REPAIR KIT If your board needs repair, use the patches in the repair kit and follow these steps: 1. Deflate the board completely, lay it flat and wait for it to dry. 2. Cut a patch that is 2 inches larger than the tear/rip all the way around. 3.
APPENDIX FOR YOUR SAFETY • Check your board and equipment before going in the water. • Try to avoid going on the water alone. • Always have a mode of communicating while on the water. • Check weather conditions and tide before going out to ride. •...
Need help?
Do you have a question about the SereneLife SLSUPB105 and is the answer not in the manual?
Questions and answers