Electrical Hazards - Brother ADS-1300 Quick Setup Manual

Product Safety Guide
To use the unit safely
WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may
create the risk of an electrical shock. In addition,
you could create the risk of an electrical short,
which may create the risk of a fire.
There are high-voltage electrodes inside the
machine and the AC Adapter. Before you access
the inside of the machine, make sure you have
unplugged the USB cable from the computer and
the AC Adapter from the AC power outlet.
DO NOT push objects of any kind into the unit
through slots or openings in the machine, as they
may touch dangerous voltage points or short out
parts.
DO NOT continue using the machine or the
AC Adapter if it has been dropped or the
machine has been damaged. Instead, unplug
the USB cable from the computer and the
AC Adapter from the AC power outlet and contact
Brother Authorized Service Personnel.
If water, other liquids, or metal objects get inside
the machine or the AC Adapter, immediately
unplug the USB cable from the computer and the
AC Adapter from the AC power outlet and contact
Brother Authorized Service Personnel.
AC Adapter Safety (For users using the
AC Adapter (SA-AD-001))
Only use the AC Adapter with the machine.
Only plug the AC Adapter into a power outlet
with voltage that is within the range indicated on
Specifications in the Online User's Guide. Failure
to do so may result in injury to yourself or others,
or damage to the machine or other property.
Brother does not assume any responsibility for
any damage resulting from using an AC Adapter
other than the one specified.
DO NOT use a damaged AC Adapter.
DO NOT damage, modify, or place heavy objects
on the AC Adapter.
DO NOT forcibly bend or pull the cord of the
AC Adapter.
DO NOT drop, hit, or otherwise damage the
AC Adapter.
DO NOT use or touch the unit during
a thunderstorm when the AC Adapter is plugged
in. There may be a risk of electrical shock from
lightning when the machine is used during
a thunderstorm.
When disconnecting the AC Adapter from the
machine or from the power outlet, always hold
the AC Adapter or the connector, not the cable,
and pull firmly.
Failure to do so may result in exposed or broken
cable wires and/or create a risk of fire.
If you notice any damage or abnormalities while
using the AC Adapter, do not touch it. Disconnect
the power supply from the AC power outlet in a
safe manner, such as by turning off the breaker,
and contact Brother Authorized Service Personnel.
Brother strongly recommends that you DO NOT
use any type of extension cord.
Make sure that the AC Adapter is firmly plugged
into a standard power outlet. Do not use an outlet
that is loose. If the AC Adapter is not completely
plugged into the power outlet and adapter block,
the adapter may become hot and/or catch fire.
(Example for USA)
5