Don't Forget To Register - Brother ADS-1300 Quick Setup Manual

4
Connect your machine and install software
Select your preferred scanning method and choose your connection method.
A
Using your scanner with your computer or mobile device
Visit setup.brother.com
install the required Brother software.
setup.brother.com
For Mac: Visit support.brother.com/mac
download the required Brother software.
B
Using your scanner as a standalone device (ADS-1350W/ADS-1800W only)
Connect your machine to your network via Wi-Fi
You can set up your Wi-Fi connection using either the machine's control panel or your computer.
This machine supports only 2.4 GHz.
Manual Wireless Setup (ADS-1350W/ADS-1800W only)
If you do not have a computer connected to the network or if you cannot connect your machine using your computer, try to set up the
connection manually.
ADS-1350W
Press and hold for
two seconds.
ADS-1800W
Press > [Find
Wi-Fi Network] >
[Yes].
NOTE
• If setup is not successful, restart your machine and the wireless access point/router, and then repeat these steps.
• If using a computer, go back to
NOTE
If setup is still not successful, visit
specifications, see the Online User's Guide.
Power Shortage Error
LED Status
(ADS-1300/ADS-1350W)
Off
Flashing
Off

DON'T FORGET TO REGISTER!

Registering your product will provide purchase confirmation, proof of ownership and, if you choose, allow us to
notify you of product enhancements and special offers!
You can register online at:
2
to download and
to
When the Wi-Fi Indicator starts
blinking, press the WPS button on your
wireless access point/router.
Select the SSID (Network Name).
Enter the Network Key (Password).
If you cannot find your SSID or
Network Key, ask your network
administrator or wireless access
point/router manufacturer.
A
to install software.
support.brother.com
Off Lit
Flashing Off
Off Off
www.registermybrother.com
Follow the on-screen
instructions to continue
installation.
For Mobile Devices
(ADS-1350W/
ADS-1800W only):
Set up the connection
manually.
.
®
for FAQs, Troubleshooting, and manuals. For product
LCD Status
(ADS-1800W)
The Home Screen appears.
The error message
"Power Shortage (Code: 01)"
appears.
The machine is not turned on
and nothing appears.
(USA)
Setup Finished
When finished, restart your computer.
If not successful, set up the connection
manually.
For detailed scanning instructions, see
the Online User's Guide at
support.brother.com/manuals.
When the wireless setup is successful, the Wi-Fi
Indicator stops blinking and remains lit.
When the wireless setup is successful, the LCD
displays [Connected].
Scan
Description
Operation
The machine works correctly,
running on over 15 W power.

The machine does not work due to
a power shortage (less than 15 W).
✕
Visit support.brother.com
FAQs & Troubleshooting or see
your model's Online User's Guide
✕
at support.brother.com/manuals.
for