Sleep Operation - Haier HSU-24HEA03 Operation Manual

Operation

Sleep Operation

Before going to bed,you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring
you a sound sleep.
Use of SLEEP function
After the unit starts,set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become
1 higher than temp.setting.After another 1 hours,
O C
temp.rises by 1 C futher.The unit will run for further
O
6 hours then stops Temp. is higher than temp.
setting so that room temperature won't be too low
for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
2. In HEAT mode
1 hours after SLEEP mode starts,temp will
become 2 lower than temp.setting.After
C
O
another 1 hours,temp decrease by 2
futher.After more another 3hours,temp.rises
O C
by 1 futher.The unit will run for further 3
hours then stops.Temp.is lower than temp.
setting so that room temperature won't be
too high for your sleep.
Temp.setting
1 hr
Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
4
SLEEP operation stops
Approx.6hrs
O
Rises 1 C
O
C
Unit stop
C
O
Unit stop
O C
O C
3 hrs
Rises 1 O C
SLEEP
operation stops
In AUTO mode
3.
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation
mode.
4. In FAN mode
It has no SLEEP function.
5.Set the wind speed change when sleeping
If the wind speed is high or middle before
setting for the sleep, set for lowing the wind
speed after sleeping.
If it is low wind, no change.
Note
When TIMER function is set, the sleeping function
can't be set up .After the sleeping function is set up
if user resets TIMER function, the sleeping function
will be cancelled;the machine will be in the state of
timing-on.
POWER/SOFT Operation
(1)
POWER Operation
When you need rapid heating or cooling, you can use
this function. In COOL mode, fan speed automatically
takes high speed of AUTO fan mode. In HEAT mode,
fan speed antomatically takes high speed of AUTO
fan mode.
(2)
SOFT Operation
You can use this function when silence is needed for rest
or reading. In SOFT operation mode, fan speed
antomatically takes low speed of AUTO fan mode.
Note
During POWER operation, in rapid HEAT or COOL mode,
the room will show inhomogeneous temperature distribution.
During SOFT operation will cause effect of not too cool
or not too warm.
To cancel POWER or SOFT operation
The POWER / SOFT symbols on the remote controll
will be disappeared after 15 minutes, the unit continues to
run according to the original state. Press POWER/SOFT
button again, POWER or SOFT disappears.
HEALTHY Operation
Healthy Negative ions
The anion generator in the airconditioner can
generate a lot of anion effectively balance the
quantity of position and anion in the air and also
to kill bacteria and speed up the dust sediment in
the room and finally clean the air in the room.
,