Haier HSU-22CW03 Operation Manual page 14

Operation
TIMER ON-OFF
(1)After unit start, select your desired operation mode
Operation mode will be displayed on LCD.
Power indicator on indoor unit lights up.
(2) Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
O N
O FF
TIMER OFF
TIMER ON
Select TIMER ON-OFF. "ON" will
(3)Time setting for TIMER ON
Press HOUR
Every time the button is pressed, time increases 10min.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refer's to morning and PM to afternoon.
(4) Time confirming for TIMER ON
After time setting, press TIMER button to
confirm.
Time displayed: Unit starts at x hour x min.
(5) Time setting for TIMER OFF
Follow the same procedures in "Time setting for TIMER
(6)Time confirming for TIMER
After time setting, press SET button to confirm, "OFF" stops flashing.
Time displayed: Unit stops at X hour X
To cancel TIMER mode
Just press TIMER button several times until TIMER mode
According to the Time setting sequence of TIMER ON or TIMER OFF, either Start-Stop or
Stop-Start can be achieved.
blan
O N
O FF
TIMER ON-OFF
AM
O N O FF
AM
AM
TEMP
ON
1
OFF
SWING FAN
MODE SLEEP
5
CLOCK
SET
6
TIMER
3
2
4
LOCK RESET