Enabling Devices Big Talk Triple Play 4202R User Manual

Action #3: Make sure that there is nothing inhibiting the depression of the
switch plate OR holding the switch plate down (i.e. icons, crumbs, sticky juice,
etc.)
Big Talk Triple Play #4202R,Y,B,G,P
Action #4: Make sure that you DID NOT RELEASE the red record button on the
bottom of the unit while recording each individual (for sequencing messages)
level.
Action #5: If you are using an external capability switch, make sure that there is
a TIGHT connection between the switch and the unit (there should be NO gaps).
Especially check this when using adapters. Any gaps will cause the unit to
function incorrectly or not work at all.
Action #6: If you are using an external capability switch, test that switch with
another device to rule out the switch as the source of the problem. Do the same
with any adapters that you may be using.
Problem: My switch activations do not work when I activate a message.
Action #1: When using the message/switch activation feature the
USER'S GUIDE
Random/Sequencer/Single switch needs to be set to Sequencer/Single only.
If set to Random, your switch activations will not work.
Action #2: Make sure you have setup switch activations as explained in
operation # 14.
Care of the Unit:
The Triple Play can be wiped clean with any mild household multi-purpose, non-
abrasive cleaner and disinfectant. We recommend Simple Green, which is a non
toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
50 Broadway
Hawthorne, NY 10532
For Technical Support:
Tel. 914.747.3070 / Fax 914.747.3480
Call our Technical Service Department
Toll Free 800.832.8697
Monday through Friday, 9 a.m. to 5 p.m. (EST)
www.enablingdevices.com
1-800-832-8697
customer_support@enablingdevices.com