Presetting Stations - Aiwa CDC-X116 YU Operating Instructions Manual

To turn the unit off
Press PWR.
Note
The "ST" indicator lights up when the tuned-in
station is broadcasting in stereo and the reception
is good.
PRESETTING STATIONS
1
2
1
23
3
Press PWR to turn the unit on.
Press BAND to select a desired bsnd
from among FM1, FM2, FM3, AM1, and
AM2.
Press and hold A.ME for more than 2
seconds to activate the automatic
presetting function.
This unit can store up to 6 stations in memory
for the preset station buttons 1 to 6 with "LO
(local) indicator lighting up.
If the unit could not search for all of 6 stations,
"LO (local) indicator goes off and starts
searching for weaker stations again.
Use this function to automatically preset up to 6
stations each for FM1, FM2, FM3, AM1, and AM2
(up to a total of 30 stations).
When auto memory is completed, the station
stored in the preset station button 1 is tuned in.
To stop auto memory, press A.ME again.
To checkthe presetstations(presetscan)
If you wish to check the preset stations, press
A. ME forlessthan 2 seconds. The preset stations
stored in memory will be tuned in for 5 seconds
each in order.
To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
mm
ENGLISH
6