Setup Menu - JVC BR-S822U Service Training

SETUP MENU
Mee Pie apne Se 2
Pen Ree SroH oe § 3 9
SSE elt,
By engaging the Menu Set mode, you can cancel any preset
functions that you don't require or change certain parameters as
desired.
1. Set the MENU SET switch to ON.
e The set-up menu appears on the monitor screen. The
counter display will also switch to the Menu Set mode.
e The Menu number (000) for the first item will blink.
. Turn the Jog dial to locate the item you want to set.
e Turning the dial clockwise increments the setting items
(000-001-100, etc.); turning it counterclockwise,
decrements the setting items.
. When you locate an item you wish to change, press PLAY.
. Press PLAY again to change the setting.
. To continue setting, repeat steps 2 to 4.
. Press REC to store the new settings.
. To exit the menu, set the MENU SET switch to OFF.
NOTE:
All menu items can be automatically restored to their initial
settings. To do this, first switch off the VCR's power. Then,
while pressing STOP, COUNTER RESET; and EJECT
simultaneously, switch on the power. All menu items will have
been restored to their initial settings.
MENU SET switch
voeo casestTre macomoen BR-SSLS2U
10
REC button
[DATA STORE}
COUNTER RESET button EJECT button
STOP button
BR-S822 Course Introduction
page 11