Pioneer DMH-W3050NEX Operation Manual page 67

Changing the widescreen mode
You can set the screen mode for the AV screen and image files.
1
Touch the screen display mode key.
Screen display mode key
2
Touch the desired mode.
[Full] Displays images across the entire screen.
NOTE
Some images may not be displayed across the entire screen.
[Zoom] Displays images by enlarging them vertically.
[Normal] Displays images without changing the ratio.
[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio
left as-is. If the screen ratio differs from the image, the image may be displayed
partly cut off either at the top/bottom or sides.
NOTE
[Trimming] is for image files only.
TIPS
• Different settings can be stored for each video source.
• When a video is viewed in the widescreen mode with a setting that does not match its original aspect
ratio, it may appear different.
• The video image will appear coarser when viewed in [Zoom] mode.
NOTES
• Image files can be set to either [Normal] or [Trimming] in the widescreen mode.
• Depending on the software version of this unit, this function may vary.
AUX
- 67 -
Full