Pioneer DMH-W3050NEX Operation Manual page 57

Menu Item
[Picture Adjustment]
[Brightness]
[-10] to [+10]
[Contrast]
[-10] to [+10]
[Color]
[-10] to [+10]
[Hue]
[-10] to [+10]
[Dimmer]
[0] to [+8]
[Temperature]
[-3] to [+3]
[Factory Reset]
Description
You can adjust the picture for each source, rear view
camera.
To adjust following menu, touch
CAUTION
For safety reasons, you cannot use some of these functions while
your vehicle is in motion. To enable these functions, you must
stop in a safe place and apply the parking brake.
NOTES
• The adjustment settings of [Dimmer] for when your vehicle's
headlights are off (daytime) and on (nighttime) are stored
separately.
• The value of [Dimmer] is switched automatically depending on
the setting of [Dimmer Settings].
• The picture adjustment may not be available with some rear
view cameras.
• The setting contents can be memorized separately.
Adjust the black intensity.
Adjust the contrast.
Adjust the color saturation.
Adjust the tone of color (which color is emphasized, red, or
green).
Adjust the brightness of the display.
Adjust the color temperature, resulting in a better white
balance.
Touch [OK] to restore the settings to the default settings.
CAUTION
Do not turn off the engine while restoring the settings.
NOTES
• This setting is available only when you stop your vehicle in a safe
place and apply the parking brake.
• The source is turned off and the Bluetooth connection is
disconnected before the process starts.
• Before starting the restore process, disconnect any device that is
connected to the USB port. Otherwise, some settings may not
be restored correctly.
- 57 -
, , , to adjust.