Bluetooth - Pioneer DMH-W3050NEX Operation Manual

Bluetooth®
Bluetooth connection
1
Turn on the Bluetooth function on the device.
2
Display the connected Bluetooth device list screen on the device.
3
Touch .
4
Touch then [Bluetooth Settings].
5
Touch [Search].
The unit starts to search for available devices, then displays them in the device list.
To search for available devices again, touch
6
Touch a desired device on the screen.
TIPS
• If you touch
displayed.
• A pop-up message may appear if another device is already connected to the unit. Touch [OK] on
the message.
7
Touch [Yes] to pair with the device.
8
Perform the pairing operation by operating the device.
After the device is successfully registered, a Bluetooth connection is established by
the system. Once the connection is established, the device name is displayed on the
list.
TIP
You can register up to five Bluetooth devices on this product.
W3050NEX W3000NEX
TIPS
• Once an Apple CarPlay or Android Auto compatible device is connected via Bluetooth, the device
may be automatically connected with Wireless Apple CarPlay or Android Auto at the timing of
Bluetooth reconnection such as by turning the ignition switch to on (ACC ON).
• Two cellular phones can be connected to this product at the same time.
• If you try to connect an unconnected cellular phone while two cellular phones are already connected,
the first one of the two connected cellular phones will be disconnected and the unconnected cellular
phone will be connected instead.
, the device name and address of the Bluetooth device on this product are
.
- 18 -