Before First Use - Frigidaire EFIC101 Use & Care Manual

BEFORE FIRST USE
This portable ice maker uses a fully automatic control
system, with an advanced
microcomputer for easy and convenient ice making. Making
ice is simple and
fast. Just add water, plug into an outlet, and press
the ON button. You can select
one of the two ice cube sizes with the touch of a button.
When first turning on
the unit or during icemaking cycles, the compressor
will stay idle for 3 minutes,
while energizing.
There are warning indicators that alert you to fill
water when the reservoir is
empty and to remove ice when the storage basket is
full, The ice maker also
has built-in safeguards that can limit accidental damage,
automatically shutting
down the system when necessary.
Please read carefully.
The incline angle of the ice maker cabinet should not exceed 45®C during
transportation or use. Do not turn the ice maker upside
down. Doing so could
cause the compressor or refrigerating system to operate
incorrectly. When the
ice maker is moved or transported, please allow time
for the fluids in the
compressor to settle. Before using the ice maker for the first time, please wait 2
hours after the unit has been leveled and positioned
in its proper place.
Please ensure the ice maker is level and on a stable
table or platform to avoid
malfunction.
The machine must be placed on a dry and level surface
with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive gases.
Leave an 8-inch clearance on all sides of the ice maker
for proper ventilation.
Do not fill the water reservoir with hot water. This may damage the ice maker.
It is best to fill the water reservoir with water of room temperature or lower.
1.
2.
3.
4,