Download Print this page

Advertisement

Quick Links

TM/LM-5015 & TM/LM-5016
POS Monitor User Manual
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable standards. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions manual, may cause interference to radio communications. It has been tested
and found to comply with limits for a Class A digital device pursuant to subpart B of Part 15 of
FCC Rules, which are designed to provide reasonable protection against interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement résidentiel, cet
équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the
authorized technicians. The user should consult his/her dealer for the problem happening.
Warranty voids if the user does not follow the instructions in application of this merchandise. The
manufacturer is by no means responsible for any damage or hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une personne autre que
les techniciens autorisés. L'utilisateur doit consulter son revendeur pour le problème qui se produit.
La garantie s'annule si l'utilisateur ne suit pas les instructions d'application de cette marchandise.
Le fabricant n'est en aucun cas responsable de tout dommage ou danger causé par une mauvaise
application.
警告
為避免電磁干擾,本產品不應安裝或使用於住宅環境。
WARNING
Power cord shall be connected to a socket-outlet with earthing connection.
18370901010 Ver. A0
http://www.posiflex.com
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the LM-5015 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POSIFLEX LM-5015

  • Page 1 TM/LM-5015 & TM/LM-5016 POS Monitor User Manual SOME IMPORTANT NOTES FCC NOTES This system meets industry & government requirements and applicable standards. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
  • Page 2: Package Contents

    Display Cable (Different depends on POS terminal series)…….…….(x 1)  USB Cable for Touch……………………………..………..………..(x 1)  User Manual…………………………………………………………..(x 1) Views of TM/LM-5015 & TM/LM-5016 Front View Camera (Optional) 15” LCD Panel/P-CAP Touch Panel The Mark which indicating the position of the barcode scanner...
  • Page 3 Rear View LM/TM-5015 VESA Mount Screw Holes Side Attachment Cover Outside I/O Port Barcode Scanner VESA Mount Screw Holes Window (Optional) Rear Mount LM/TM-5016 Attachment Cover Side Attachment Cover Outside I/O Port...
  • Page 4 Mounting your Monitor to Gen9 Base Stand The following instructions are provided to help you mount your TM/LM monitor to Posiflex Gen9 base stand. During installation, please ensure the terminal and the stand are properly turned off and disconnected from the power sources to avoid potential hazards.
  • Page 5 Route the cables along the direction shown in the below figure. Remove the top rear cover and the cable cover by pressing and pulling at the position which circled in the below picture. Press and pull. Remove the hinge cover of the POS terminal with both hands.
  • Page 6 Pass the display cable and the USB cable through the cable exit to the front side. Cable Exit...
  • Page 7 12V DC-OUT connector is located at the rear side of the power board which shown as the below picture. You can also find the information of Gen9 base from the relevant user manual, which can be downloaded from Posiflex Global Website. (http://www.posiflex.com/en-global/Download/download) 12V DC-OUT...
  • Page 8 Close the two hinge cover onto the 2 display hinge. Put the hinge cover to the 2 display VESA bracket.
  • Page 9 Connect the display cable and the USB cable to the POS terminal. 10. Put the hinge cover back to the VESA bracket of the POS terminal. 11. Tilt the monitor screen to your desired angle. While setting up the tilting adjustment, be careful NOT to press on the LCD panel.
  • Page 10 Identifying your Monitor as Secondary Touchscreen Monitor in Extended Mode In the following section the related descriptions will be offered to help you set up TM series as the extended monitor when you attempt to extend the desktop across multiple monitors For TM-5015/5016 Models with P-CAP Touchscreen If your monitors are TM-5015/5016 models, you may configure the display settings from Control Panel in Microsoft Windows to identify the monitor as...
  • Page 11 POS terminals and electricity is supplied to the monitor through POS terminal. Installing Drivers Please visit Posiflex official website to download and install the related drivers. http://www.posiflex.com/en-global/Download/download) Setting up Display Resolution for Your Monitor The below chart defines the list of recommended display settings for TM/LM monitor.
  • Page 12: Specification

    Scan the below barcode to restore Auto Trigger defaults. Scan Area To do the further setting of the scanner engine, please find the relevant user manual on Posiflex Global Website, (http://www.posiflex.com/en- global/Download/download) or contact the service team for technical support.
  • Page 13 TM/LM-5015: 2.1 kg TM/LM-5016: 1.7 kg ※ The product information and specifications are subject to change without prior notice. To get the detailed information on TM/LM-5015 & TM/LM-5016 please check this model from Posiflex Global Website (http://www.posiflex.com/en- global/Download/download). Outline Dimension...
  • Page 14 TM/LM-5016...
  • Page 15 <MEMO>...
  • Page 16 <MEMO>...

This manual is also suitable for:

Tm-5015Lm-5016Tm-5016