Black & Decker BFWL16R Instruction Manual page 11

SET UP & USE
ON / SPEED
• Press this button to turn the fan ON, as it will make an initial beep sound. The fan will
begin to operate at low speed if it is the first time you have plugged it in. If the fan was
plugged in previously, it will operate at the speed setting when last turned off. Press the
button to turn the fan OFF at any time.
• Continue to press the key to scroll through the SPEED settings. The corresponding LED
light Low, Medium or High will illuminate on the control panel to indicate the selected
speed.
MODE
• Pressing the "MODE" button repeatedly will select NORMAL, NATURAL or SLEEP
modes.
• NORMAL mode provides steady airflow and cycles through high, medium and low fan
speeds.
• NATURAL mode simulates a breeze and cycles through the high to low fan speed.
• SLEEP mode simulates a breeze like natural mode but will cycle to a lower speed after a
period of time. When the unit is in SLEEP mode the unit will not have any sound and the
lights will go off after 30 seconds.
TIMER
• The fan is equipped with a shut-off timer that allows you to set its length of operation
from .5 hour to 7.5 hours. Continue to press the TIMER button to scroll through the
different time selections of .5 hour, 1 hour, 2 hours, and 4 hours. The combination of
selections .5, 1, 2 and 4 will be illuminated. The fan will automatically shut-off after the
selected duration.
OSC
• Pressing the 'OSC' button will start and stop the oscillation function.
OFF
• Press this button to turn the fan off at any time.
Page 11