22 MAINTENANCE
NOTE
• Replace the dust bag if it smells, even if it is not
full.
• The motor protection filter will eventually need
to be replaced. Contact an LG Electronics
customer service center.
Cleaning the Filters
Clean the motor protection filter and the exhaust
filter every 3 months or sooner if the dust
emptying function seems weaker.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
CAUTION
• Do not use the appliance without the exhaust
filter and the motor protection filter installed.
Doing so could result in product damage.
1
Open the left and right component storage
doors.
2
Hold the product with one hand and open the
dust bag door with the other hand.
3
Hold the product with one hand and take out
the motor protection filter with the other
hand.
4
To remove the exhaust filter, hold the bottom
of the product and pull the handle end of the
filter.
5
Remove dust from the motor protection filter
and exhaust filter once every 3 months and
wash them using room temperature water.
• To avoid odor and the malfunction of the
motor, allow the motor protection filter and
the exhaust filter to dry completely in a well-
ventilated area out of direct sunlight for at
least 24 hours before reassembling.
6
Push the motor protection filter and exhaust
filter back into their original positions.
• Make sure that the filters are in place before
using the product.
Need help?
Do you have a question about the VDS-ST8 Series and is the answer not in the manual?