Table of Contents
Advertisement
Available languages
Available languages
SETTING THE CLOCK
1
Press PWR to turn the unit on.
2
Press DISP to have the clock displayed.
If the clock indication is already displayed,
skip this step.
3
Press and hold DISP for more than 2
seconds.
4
Press TUNE i, then rotate the Jog Dial
to set the hour.
Press TUNE k, then rotate the Jog Dial
to set the minute.
Rotate the Jog Dial clockwise to go forward.
Rotate the Jog Dial counterclockwise to go
backward.
5
Press DISP.
The clock starts working from 0 second.
To have the clock displayed when the unit is on
Press DISP. To return the unit to its former
display, press DISP again.
RADIO OPERATION
1
Press PWR to turn the unit on.
2
Press FUNC repeatedly to select the
band from among FM1, FM2, FM3, AM1,
and AM2.
The band indicators appear cyclically in order.
• FM1, FM2 and FM3 share the same
frequency range.
• AM1 and AM2 share the same frequency
range.
Band indicator
Frequency indication
3
Press (and hold for more than 2
seconds) either TUNE i or TUNE k to
tune in the desired station.
The unit starts scanning and tunes in a station
automatically (seek tuning).
Press TUNE i to increase and TUNE k to
decreases the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (for less than 0.5 second at a
time) either TUNE i or TUNE k, the frequency
increase or decreases step by step.
4
Adjust the volume with the Jog Dial.
continued
Page 4
ENGLISH
CTZ110(YU)-total-En-5
Advertisement
Chapters
Table of Contents
