management hardware and flows. Thus, software can manage each core
independently, while the actual power management adheres to the platform
and CPU shared resource restrictions. Configuration options are: [C2], [C3],
[C4] and [Disabled]. The default value is [Disabled].
3 . 4 . 3 Chipset Configuration
3 . 4 . 3
3 . 4 . 3
3 . 4 . 3
3 . 4 . 3
Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Memory Remap Feature
DRAM Frequency
Flexibility Option
Standard Memory Info : 5-6-6-18-42-6-3-3-3
DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
DRAM tRFC
DRAM tWR
DRAM tWTR
DRAM tRRD
DRAM tRTP
Advanced Memory Info : 18-18-7-7-0-0
DRAM CH0 RCOMP ODT
DRAM CH1 RCOMP ODT
DRAM CH0 tRD
DRAM CH1 tRD
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) in-
serted and assigns appropriate frequency automatically. You may select
[333MHz (DDR2 667)], [400MHz (DDR2 800)], [533MHz (DDR2 1066)] or
[600MHz (DDR2 1200)]. The configuration options depend on the CPU and
memory module you adopt on this motherboard. Please refer to page 8 for the
CPU FSB frequency and its corresponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Standard Memory Info : 5-6-6-18-42-6-3-3-3
DRAM tCL
Use this item to adjust the means of memory accessing. Configuration
options : [3], [4], [5], [6], [7] and [Auto].
DRAM tRAS
This controls the number of DRAM clocks for TRAS. Configuration options:
Configuration options: [Auto], [9] to [24].
DRAM tRP
This controls the number of DRAM clocks for TRP. Configuration options:
Configuration options: [Auto], [3] to [10].
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Disabled]
above the total
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
[Auto]
remapping of memory.
[Auto]
[Auto]
[Auto]
Select Screen
Select Item
[Auto]
[Auto]
+ -
Change Option
F1
General Help
[Auto]
F9
Load Defaults
[Auto]
F10
Save and Exit
ESC
Exit
[Auto]
[Auto]
[Auto]
4 2
4 2
4 2
4 2
4 2