Inserting the SIM Card Insert the SIM card into the slot with its chip side facing down and the notched side facing out. mini-SIM (2FF) nano-SIM (4FF) micro-SIM (3FF) Powering on the Mobile WiFi Press and hold the Power button to power on the Mobile WiFi. Your Mobile WiFi searches for mobile network signals automatically after it is powered on.
Accessing the Internet Connect your device to the Mobile WiFi to access the Internet. Press the MENU button on your Mobile WiFi to enter the menu screen and ® check the Wi-Fi network name (SSID) and password (PWD). SSID: XXXXXXXX PWD: XXXXXXXX Wi-Fi Wi-Fi...
Page 4
to enter the menu screen, and view the default IP address, password and so on. • If you cannot visit the web-based management page, check whether your mobile phone or computer is connected to your Mobile WiFi. • We suggest that you modify the default Wi-Fi name and password, and the default login password to ensure that your data is secure.
Page 5
Appearance Power button LCD screen USB port MENU button SIM card slot Reset button To power off the Mobile WiFi: Press and hold the Power button until the LCD screen turns off. To restore the Mobile WiFi to its factory settings: Use a pin to press and hold the Reset button while your Mobile WiFi is powered on.
• If the issue persists, restore your Mobile WiFi to its factory settings and try again. What should I do if my Mobile WiFi's signal reception is weak or the Internet speed is slow? • Move your Mobile WiFi closer to a window or use it in an open area to receive better signal.
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAWS, IN NO EVENT SHALL SOYEA BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
This device supports the automatic update feature. Once enabled, the device will automatically download and install critical updates from SOYEA or your carrier. This feature is enabled by default, and can be configured from the settings menu on the web-based management page.
Operating environment • Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. • Do not use your device during thunderstorms to protect your device against any danger caused by lightning. •...
Charger safety • For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. • Unplug the charger from electrical outlets and the device when not in use. • Do not drop or cause an impact to the charger. •...
For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website http://www.soyea-tech.com. Reduction of hazardous substances This device and its electrical accessories comply with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH regulation, RoHS and Batteries (where included) directive.
SAR value for this device complies with this limit. Statement Hereby, SOYEA TECHNOLOGY CO., LTD. declares that this device E5785-331 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://www.soyea-tech.com.
Page 13
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user. For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at http://www.soyea- tech.com.
Need help?
Do you have a question about the E5785 Series and is the answer not in the manual?
Questions and answers