Page 1
TF75 / TFWA Bath To Tray Adaptor INSTALLATION AND USER MANUAL Stock Code: 25410 Please read all instructions before installation and leave this document with the end user for future reference as it contains important warranty information...
Page 2
Trim the wet floor covering to fit the TF75 or TFWA opening and align and fit the clamp ring (6) with the 4 x M6 screws (7). Make sure the waste trap area is clean and free from all grit or other building waste material.
Page 3
(12). Maintenence The combined TF75 or Two Part Waste and the Bath to Tray Adaptor are designed for low maintenance and reliable operation. As part of a regular maintenance programme check and clean the waste of accumulated hair or other waste material. As disassembly of the waste may not be possible without removal of the bath the combined waste should be cleaned using normal domestic bathroom cleaning materials.
Page 4
In the event that you should encounter a orders.akw-ltd.co.uk problem with this product, please contact your local installer and if this does not resolve the issue, then contact AKW technical team who will provide further advice and, if necessary, arrange for a Follow us on Social: maintenance engineer to visit and report any issues.
Need help?
Do you have a question about the TF75 and is the answer not in the manual?
Questions and answers