SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions. The safety and operating instructions should be retained for future reference. 3. Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4.
PACKAGE CONTENTS EPCD-2000....1 Piece ....1 Piece User Manual ....1 Piece ....1 Piece DEVICE SPECIFICATIONS Power Requirement Input: DC 4.5V-600mA Speaker Output Bluetooth Version Bluetooth Operation Distance Up to 15 feet in open areas Radio Frequency Range FM: 87.5 - 108 MHz...
CONNECTING POWER AC/DC POWER (Adapter not included) WARNING: • Adapter Requirements: AC 120V 60Hz Input/DC 4.5V 600mA Output. • Connect the adapter AC end to a 120V 60Hz AC wall outlet and the DC end into the DC Input on the device. power source.
OPERATING MODES CD OPERATION PLAYABLE CD TYPES This device can only play digital audio CDs, finalized digital audio CD-Recordable (CD- R) discs, finalized digital audio CD-Rewritable (CD-RW) discs, and MP3 CDs. • CD-R/CD-RW discs but it may take up to 10 seconds for playback to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the compatibility of the CD compilation software.
Page 8
REPEAT A SINGLE TRACK MODE button until the 1 icon is displayed. 1. When in play mode, press the The icon will flash on the display. The current track will be played repeatedly until you press the STOP button. MODE button until the 1 icon stops 2.
ANTI-SKIP PROTECTION This player incorporates an electronic anti-skip circuit to prevent interruption of the sound output when the unit is subjected to shock, vibration, or rolling during CD playback. The anti-shock system will automatically activate when a disc is playing. The anti-skip buffer can give you approximately 60 seconds of protection against interruption of sound output for a standard CD and 100 seconds for an MP3 CD.
RADIO OPERATION SELECTING STATIONS 4. Adjust the VOLUME CONTROL to the desired volume level. PRESET RADIO STATIONS LCD DISPLAY. NOTE: P01 will appear on the LCD DISPLAY if you are programming a RECALLING PRESET RADIO STATIONS • TIPS FOR BEST RECEPTION •...
BLUETOOTH OPERATION The CD player can act as a Bluetooth transmitter to a Bluetooth speaker. Follow the below steps to connect to a Bluetooth speaker and play music from a loaded CD. NOTES: • When using Bluetooth, there is no output from the headphone jack. •...
TROUBLESHOOTING SYMPTOM CAUSE POSSIBLE REMEDY Replace with all new Depleted battery power. No sound from the batteries. device. Volume set to minimum. Increase the volume. Noise or sound Headphone cord is not Extend the headphone distorted on FM extended. cord. broadcast.
If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.emersonaudio.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Emerson Technical support. EMERSON Technical Support 2320 East 49th Street...
Need help?
Do you have a question about the EPCD-2000 and is the answer not in the manual?
Questions and answers