Settings Menu; Default Values (Reset); Cleaning The Machine - DeLonghi EC685 Manual

9. SETTINGS MENU

1. Access the menu:
Press and hold the
button for 10 seconds
until the three buttons
flash in sequence:
2. Select the setting to be adjusted
Correspond- Press to select the
ing setting setting
Brewing This is the temperature
temperature of the water in the ther-
moblock. It is therefore
not the temperature
of the beverage in the
cup or the temperature
of the beverage at the
moment of release from
the outlets of the filter
holder.
Water
hardness
10
seconds
Press to
change the
setting
3. Exit the menu
After 15 seconds of inactivity, the machine automatically
Press
exits the settings menu.
to select Low
(*) Only for models EC685 EX4, EC685 EX4, EC785 EX4
temperature
Please note:
Press
•
to select
Medium
•
temperature

10. DEFAULT VALUES (RESET)

Press
to select High This resets the machine to the default values.
Proceed as follows:
temperature
1. Position the hot water/steam dispenser on the drip tray
2. Access the settings menu.
3. Turn the steam dial (A11) to
4. Press the button
Press
to select Low
5. The
hardness
When the steam dial has been closed, the appliance is ready for
Press to
use.
select Medi-
um hardness

11. CLEANING THE MACHINE

The following parts of the machine must be cleaned regularly:
Press to
•
select High
•
hardness
•
→
•
•
9
Auto-off
The light corresponding to the changed setting flashes
quickly to confirm the change.
After 15 seconds of inactivity, the machine automatically
exits the settings menu and is ready for use.
(A9);
. The three lights flash simulta-
neously to confirm that the original settings have been
restored.
and lights flash to indicate that the
steam dial must be closed again (○ symbol).
drip tray (A9)
coffee filters (C2), (C3) and (C4);
coffee spout (A5);
water tank (A3);
the hot water/steam dispenser as indicated in chapter "7.2
Cleaning the frother after each use";
Press
to select 9
minutes
(* 5 min)
Press
to select 30
minutes
(* 90 min)
Press
to select 3
hours
;