Omron SYSDRIVE 3G3JV Setup Manual page 56

List of Parameters
Param- Name
eter
No.
(Regis-
ter No.
(Hex))
n62 UP/DOWN
command
(013E)
frequency
memory
n63 Torque
compensa-
(013F)
tion gain
n64 Motor
rated slip
(0140)
n65 Motor no-
load cur-
(0141)
rent
n66 Slip com-
pensation
(0142)
gain
n67 Slip com-
pensation
(0143)
time
constant
3-16
Description
Used to store the adjusted frequency refer-
ence with the UP/DOWN function.
0: Frequency not stored
1: Frequency stored
The frequency must be on hold for 5 s or
more.
Used to store the adjusted frequency refer-
ence with the UP/DOWN function.
0: Frequency not stored
1: Frequency stored
The frequency must be on hold for 5 s or
more.
Used to store the adjusted frequency refer-
ence with the UP/DOWN function.
0: Frequency not stored
1: Frequency stored
The frequency must be on hold for 5 s or
more.
Used to set the gain of the torque compensa-
tion function.
The default setting does not need any
changes in normal operation.
Used to set the rated slip value of the motor in
use.
Note Used as the constant of the slip com-
pensation function.
Used to set the no-load current of the motor in
use based on the rated motor current as
100%.
Note Used as the constant of the slip com-
pensation function.
Used to set the gain of the slip compensation
function.
Note The slip compensation function is dis-
abled with n66 set to 0.0.
Used for the response speed of the slip com-
pensation function.
Note The default setting does not need any
changes in normal operation.
Chapter 3
Set- Default Changes
ting setting during
range opera-
tion
0, 1 0 No
0.0 to 1.0 Yes
2.5
0.0 to Varies Yes
20.0 with the
capac-
ity.
0 to Varies No
99 with the
capac-
ity.
0.0 to 0.0 Yes
2.5
0.0 to 2.0 No
25.5
Memo