Operating Environment Precautions - Omron NQ HMI Getting Started Manual

Operating environment precautions

1-4 Operating environment precautions
!Caution
!Caution
!Caution
ix
Do not operate the control system in the following locations. Doing so may result in
malfunction, electric shock or burning:
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidities outside the range specified in the
specifications.
• Locations subject to condensation as the result of severe changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
Take appropriate and sufficient countermeasures when installing systems in the
following locations. Doing so may result in malfunction:
• Locations subject to static electricity or other forms of electric noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
The operating environment of the HMI System can have a large effect on the longevity
and reliability of the system. Improper operating environments can lead to malfunction,
failure and other unforeseeable problems with the system. Make sure that the operating
environment is within the specified conditions at installation and remains within the
specified conditions during the life of the system. Follow all installation instructions and
precautions provided in this operation manual.
Section 1-4