Toshiba XM-6702B User Manual page 2

Eject The EJECT button is used to open the disc tray so you can install or remove a disc.
Button
Busy When you install a disc into the CD-ROM drive, the BUSY light flashes slowly as it attempts
Indicator to locate the disc. One of the following will occur:
BUSY light goes out. The CD-ROM drive is ready to read data from the disc.
BUSY light flashes slowly. The disc may be dirty.
BUSY light remains ON. The CD-ROM is accessing data.
BUSY light remains ON indefinitely. The CD-ROM is experiencing an error
Headphone The headphone jack is used to connect headphones to your CD-ROM.
Jack
Emergency The emergency eject hole is to be used only when the CD tray will not open when EJECT
Eject button is pressed.
Hole
Volume The volume control is used to adjust the level of the audio signal from the headphone jack.
Control The volume control does not affect the level of the signal sent to the audio output on the
back of the drive.
CD Tray Insert CD Disc in tray.
top of page