Advertisement
SINGLE-DECK MERCHANDISER
INSTALLATION & OPERATIONS MANUAL
Technical Reference ...........................................2-4
General Information ............................................... 5
Installation ..........................................................6-7
Pre-Power Checklist .............................................. 8
Heat Controls & Settings ................................ 9-11
To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualified tech-
nicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/
service contractors, please visit our website at www.hillphoenix.com.
BMD-H/DELI
Table of Contents
Case Cleaning ......................................................12
Parts Ordering ......................................................13
Appendices
04/24
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dover Hillphoenix BMD-H/DELI
Summary of Contents for Dover Hillphoenix BMD-H/DELI
-
Page 1: Table Of Contents
SINGLE-DECK MERCHANDISER INSTALLATION & OPERATIONS MANUAL BMD-H/DELI Table of Contents Technical Reference ...........2-4 Case Cleaning ............12 General Information ..........5 Parts Ordering ............13 Installation ............6-7 Appendices Pre-Power Checklist ..........8 Heat Controls & Settings ........ 9-11 To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualified tech- nicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. - Page 3 LIABILITY NOTICE For Cases with Shelf Lighting Systems Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting system, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including, without limitation, electrical failures, fire, electric shock, and mold) in turn resulting in personal injury, death, sickness, and/or serious property...
- Page 4 Important t Hillphoenix ® , the safety of our customers and employees, as well as the ongo- ing performance of our products, are top priorities. To that end, we include impor- tant warning messages in all Hillphoenix installation and operations handbooks, accompanied by an alert symbol paired with the word "DANGER", "WARNING", or "CAUTION".
- Page 5 Revision History • new manual format_05/19 • warranty_10/19 • technical reference, shipping braces, seismic anchoring, service parts contacts and T-8 connectors notice after shipping_09/21 • technical reference_01/23 • controller update_03/24...
-
Page 6: Technical Reference
TECHNICAL REFERENCE Service Single-Deck Hot Merchandiser w/ Flat or Curved Lift Glass BMD-H 4', 6', 8', 10' & 12' (Deli) GENERAL NOTES: • "---" Indicates that the feature is not an option on this case model and/or the data is not yet available at this time. •... - Page 7 TECHNICAL REFERENCE BMD-H Service Single-Deck Hot Merchandiser w/ Flat or Curved Lift Glass 4', 6', 8', 10' & 12' (Deli) SERVICE DATA Bottom Total Amps Heaters Heaters Lights Shelves (120/208-3-60) Case Watts Watts Watts Watts Length (Each) (Each) (Each) (Each) Qnty Qnty Qnty...
- Page 8 TECHNICAL REFERENCE BMD-H Service Single-Deck Hot Merchandiser w/ Flat or Curved Lift Glass 4', 6', 8', 10' & 12' (Deli) SLIDING SLIDING REAR LOAD DOORS CERAMIC TOP HEAT REAR LOAD DOORS CERAMIC TOP HEAT 8 5/8" [21.8 cm] 8 5/8" [21.8 cm] 27 1/8"...
-
Page 9: General Information
GENERAL INFORMATION hank you for choosing Hillphoenix for your food merchandising needs. This handbook contains important technical infor- mation and will assist you with the installation and operation of your new Hillphoenix specialty cases. By closely following the instructions, you can expect peak performance; attractive fit and finish; and long case life. We are always interested in your suggestions for improvements (e.g. -
Page 10: Installation
CASE INSTALLATION LOCATION This hot display case has been designed for displaying and storing perishable food product. It is engineered for air-con- ditioned stores with a maximum ambient of 75°F and 55% relative humidity. SUPPORTS When selecting the location for placement of this case, avoid the following conditions: Excessive Air Movement Fig. - Page 11 CASE INSTALLATION 3. Install the bumper, if applicable, into pre-attached bumper 7. Install the bumper into pre-attached bumper track and track and snap into place. snap into place. 4. After sufficient time has passed to allow for bumper 8. After sufficient time has passed to allow for bumper shrinkage, cut away the excess bumper for final fit and fin- shrinkage, cut away the excess bumper for final fit and fin- ish.
-
Page 12: Pre-Power Checklist
PRE-POWER CHECKLIST Before powering-up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. Have you thoroughly examined the case for shipping damage? (see pg. 5) Have you checked the horizontal level of the case? (see pg. -
Page 13: Heat Controls & Settings
HEAT CONTROLS & SETTINGS HEAT CONTROLS Hillphoenix hot cases are equipped with digital controls (Fig. 4). There are separate controls for bottom and top heat. POWER SWITCH POWER SWITCH PREHEATING Let unit operate with empty shelves for 60 minutes before load- ing with product. - Page 14 HEAT CONTROLS & SETTINGS ▲ � that setting, and turned ON and OFF using the power switch on C A U T I O N the main control. The case must be turned on 1 hour before placing the product. Be sure that all wells are covered with pans DO NOT RELY ON THERMOMETERS OR THER- or tiles all times whether filled with product or empty.
-
Page 15: Case Cleaning
CASE INSTALLATION CASE CLEANING ly clean all areas of the case. CASE CLEANING 4. Wipe down doors with a clean, disposable cloth (approved A periodic cleaning schedule should be established to maintain item) proper sanitation, insure maximum operating efficiency, and 5. -
Page 16: Parts Ordering
PARTS ORDERING CASE INSTALLATION Contact the Service Parts Department at: 1-844-HPX-PART (1-844-479-7278) dfr-ia-parts@doverfoodretail.com Provide the following information about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). •... - Page 17 CASE INSTALLATION APPENDIX A1 ....................Wiring Information B1-B8 ..................Controller Information C1 ........................Parts List...
- Page 18 A1: WIRING DIAGRAM...
- Page 19 +0500160ML - rel. 2.1 - 30.03.2022 B1: CONTROLLER INFORMATION COLLEGAMENTI ELETTRICI / ELECTRICA ADVANCED HMI VERSION Modello LARGE (IJFHL*) / LARGE model (IJFHL*) +0500160ML - rel. 2.1 - 30.03.2022 Food Storage & Catering Display JST ZH connector Plug-in male-female/ Screw connecto +0500160ML - rel.
- Page 20 ELETTRICI / ELECTRICAL CONNECTIONS Ingressi D1H, D2H Contatto pulito: non optoisolato corrente di chi- digitali usura 5 mA tipica tensione contatto aperto 12 V Modello SMALL (IJFHS*) / Model SMALL (IJFHS*) resistenza contatto max 50 Ω. ale-female/ Screw connector Plug-in male-female/ Screw connector JST ZH connector Lunghezze Ingressi analogici, ingressi digitali <...
- Page 21 B3: CONTROLLER INFORMATION Schermate Connectivity Terminale Stato Descrizione IMPORTANT WARNINGS A riposo Il display mostra la grandezza princi- The CAREL product is a state-of-the-art product, whose operation is specified in the pale alternata ad eventuali allarmi e Analogue technical documentation supplied with the product or can be downloaded, even segnalazioni inputs prior to purchase, from the website www.carel.com.
- Page 22 B4: CONTROLLER INFORMATION Backlit buttons/Icons Connectivity NFC Max distance 10 mm, variable according to the mobile device used Button Description Flashing Bluetooth Low Energy (opt.) Max distance 10 m, variable according to the mobile Icon device used • Increase value/ Scroll menu ecified in the Carel control RS485, not opto-isolated...
- Page 23 B5: CONTROLLER INFORMATION BLUETOOTH® FUNCTIONALITY Download the CAREL "Applica" app from Apple Store or Google Play Follow the steps below (modify parameters): After the Bluetooth device(s) Open the Applica app and select Bluetooth are found, select the controller that for connection type. you want to connect to.
- Page 24 B6: CONTROLLER INFORMATION Enter the desired temperature and Once the Home screen appears, then hit OK. tap on the setpoint. At this point, the heater temperature setpoint has been effectively changed in the controller. You can now disconnect the Bluetooth communication.
- Page 25 B7: CONTROLLER INFORMATION Changing the Temperature Setpoint Through the Controller Interface Press PRG to display the parameter Touch the interface of the controller value. to activate the display. Press the program button to enter Press the UP and DOWN arrows to the display active actuators/ functions change the value.
- Page 26 C1: PARTS LIST Lift Glass Hardware Case Top Front Lift Glass Die Board Front Toekick Insulated Lower Deck Full Size Deli Pan (Optional) End Panel Trim End Panel End Toekick Electrical Raceway Outside Back Bottom Deck 1/3 Size Deli Pan (Optional) Strut Sliding Rear Load Doors Ceramic Top Heat...
- Page 27 LIMITED & GENERAL WARRANTY TERMS Hill Phoenix, Inc’s. (hereinafter “Hillphoenix”) products are warranted to be free from defects in materials and workmanship under normal use and maintenance for a period of 14 months from date and place of shipment from Hillphoenix (the “Base Warranty Period”) provided that the installation and maintenance of such products have been performed strictly in accordance with Hillphoenix’s designated specifications.
- Page 28 • Loading of food or other content that prevents the product from operating properly • ‘Yellowing’ of lighting products MODIFICATIONS TO GENERAL WARRANTY The following sets forth certain modifications to the General Warranty for specific products of Manufacturer: ® DISPLAY CASE AND SPECIALTY PRODUCTS CLEARVOYANT LED LIGHTING The warranty period for Clearvoyant LED lighting components within the Clearvoyant lighting system is five years from date of shipment.
- Page 29 Warning Maintenance & Case Care When cleaning cases the following must be performed PRIOR to cleaning: To avoid electrical shock, be sure all electric power is turned off before cleaning. In some installations, more than one switch may have to be turned off to completely de-energize the case.
Need help?
Do you have a question about the Hillphoenix BMD-H/DELI and is the answer not in the manual?
Questions and answers